Command Snapshot Module – No Line Breaks

[eduardo-corral]

Like it

Up

0

Down

Drop it

::

We recently noticed that the line breaks are missing from the command snapshot view in the GUI. Multi-line output is very hard to read. Is there an easy fix for this? Thanks in advance!

Here is what it looks like:

It should look like this:

Smart Array P410i in Slot 0 (Embedded)    (sn: 5001438017EA3350)

   array A (SAS, Unused Space: 0  MB)

      logicaldrive 1 (279.4 GB, RAID 1, Interim Recovery Mode)

      physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 300 GB, Failed)
      physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 300 GB, OK)

   array B (SAS, Unused Space: 0  MB)

      logicaldrive 2 (1.1 TB, RAID 5, OK)

      physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SAS, 300 GB, OK)
      physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SAS, 300 GB, OK)
      physicaldrive 2I:1:5 (port 2I:box 1:bay 5, SAS, 300 GB, OK)
      physicaldrive 2I:1:6 (port 2I:box 1:bay 6, SAS, 300 GB, OK)
      physicaldrive 2I:1:7 (port 2I:box 1:bay 7, SAS, 300 GB, OK)
      physicaldrive 2I:1:8 (port 2I:box 1:bay 8, SAS, 300 GB, OK, spare)

   SEP (Vendor ID PMCSIERA, Model  SRC 8x6G) 250 (WWID: 5001438017EA335F)

Greetings, atarantul

Which version of Pandora FMS are you running?

Eduardo.

[atarantul]

Like it

Up

0

Down

Drop it

::

Hello Eduardo,

The version 7.0NG.723 – Build 191231 – MR 4

Thank you!

[eduardo-corral]

Like it

Up

0

Down

Drop it

::

Hello Eduardo,

The version 7.0NG.723 – Build 191231 – MR 4

Thank you!

Greetings, atarantul 

That problem with the command snapshot view was solved in Pandora FMS version 726 MR 19. Please try to update your installation to fix it.

Kind regards, 

Eduardo.

[atarantul]

Like it

Up

0

Down

Drop it

::

Ok, Will try that. Thank you!