-
SNMP OID INTERESANTES
Buenas tardes:
Aqui va una lista SNMP OIDs de servidores interesantes que he ido recopilando. Podéis ir añadiendo los que tengáis, para que todos los tengamos:
HP
——INICIO HP ——CPU Fans cpqHeThermalCpuFanStatus 1.3.6.1.4.1.232.6.2.6.5.0
Drive Array Health cpqDaMibCondition 1.3.6.1.4.1.232.3.1.3.0
Drive Array Controller (1) cpqDaCntlCondition 1.3.6.1.4.1.232.3.2.2.1.1.6.1
Power supplies cpqHEfltTolPwrSupply 1.3.6.1.4.1.232.6.2.9.1.0
System Fans cpqHeThermalSystemFanStatus 1.3.6.1.4.1.232.6.2.6.4.0
Temperature (Status) cpqHeThermalTempStatus 1.3.6.1.4.1.232.6.2.6.3.0
Thermal Conditions cpqHeThermalCondition 1.3.6.1.4.1.232.6.2.6.1.0
Integrated Management Log cpqHeEventLogCondition 1.3.6.1.4.1.232.6.2.11.2.0
Critical Errors cpqHeCritLogCondition 1.3.6.1.4.1.232.6.2.2.2.0
Correctable Memory Errors cpqHeCorrMemLogStatus 1.3.6.1.4.1.232.6.2.3.1.0Serialnumber/Barcode:
* OID: 1.3.6.1.4.1.232.2.2.2.1.0
* Type: String
* Example: 1.3.6.1.4.1.232.2.2.2.1.0 = OCTET STRING XXX00000XX
Asset Tag:
* OID: 1.3.6.1.4.1.232.2.2.2.3.0
* Type: String
* Example: 1.3.6.1.4.1.232.2.2.2.3.0 = OCTET STRING MY_ASSET_TAG
Productnumber (I added this in my environment):
* OID: 1.3.6.1.4.1.232.2.2.2.6.0
* Type: String
* Example: 1.3.6.1.4.1.232.2.2.2.6.0 = OCTET STRING—— FIN HP——
DELL
—-INICIO DELL —-
agentGlobalSystemStatus – 1.3.6.1.4.1.674.10893.1.20.110.13
0110.0013 Global health information for the subsystem managed by the Storage Management software. This global status should be used by applications other than HP OpenView. HP OpenView should refer to the globalStatus in the root level object group. This is a rollup for the entire agent including any monitored devices. The status is intended to give initiative to a snmp monitor to get further data when this status is abnormal.
Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverablearrayDiskState – 1.3.6.1.4.1.674.10893.1.20.130.4.1.4
The current condition of the array disk. Possible states: 0: Unknown 1: Ready – Available for use , but no RAID configuration has been assigned. 2: Failed – Not operational. 3: Online – Operational. RAID configuration has been assigned. 4: Offline – The drive is not available to the RAID controller. 6: Degraded – Refers to a fault-tolerant array/virtual disk that has a failed disk. 7: Recovering – Refers to state of recovering from bad blocks on disks. 11: Removed – Indicates that array disk has been removed. 15: Resynching – Indicates one of the following types of disk operations: Transform Type , Reconfiguration , and Check Consistency. 24: Rebuild 25: No Media – CD-ROM or removable disk has no media. 26: Formatting – In the process of formatting. 28: Diagnostics – Diagnostics are running. 35: Initializing: Applies only to virtual disks on PERC , PERC 2/SC , and PERC 2/DC controllers.
controllerRollUpStatus – 1.3.6.1.4.1.674.10893.1.20.130.1.1.37
Severity of the controller state. This is the combined status of the controller and its components. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable
controllerState – 1.3.6.1.4.1.674.10893.1.20.130.1.1.5
The current condition of the controller’s subsystem (which includes any devices connected to it.) Possible states: 0: Unknown 1: Ready 2: Failed 3: Online 4: Offline 6: Degraded
globalStatus – 1.3.6.1.4.1.674.10893.1.20.2
Global health information for the subsystem managed by the Storage Management software. This global status is customized for HP OpenView. Other applications should refer to the agentSystemGlobalStatus entry in the globalData object group.
Possible values: 1: Critical 2: Warning 3: Normal 4: UnknownAssettag
* OID: 1.3.6.1.4.1.674.10892.1.300.10.1.10.1
* Type: String
* Example: 1.3.6.1.4.1.674.10892.1.300.10.1.10.1 = OCTET STRING ASSETTAGSerialnumber
* OID: 1.3.6.1.4.1.674.10892.1.300.10.1.11.1
* Type: String
* Example: 1.3.6.1.4.1.674.10892.1.300.10.1.11.1 = OCTET STRING 1234567Modell
* OID: 1.3.6.1.4.1.674.10892.1.300.10.1.9.1
* Type: String
* Example: 1.3.6.1.4.1.674.10892.1.300.10.1.9.1 = OCTET STRING PowerEdge
1950Vendor
* OID: 1.3.6.1.4.1.674.10892.1.300.10.1.8.1
* Type: String
* Example: 1.3.6.1.4.1.674.10892.1.300.10.1.8.1 = OCTET STRING Dell Inc.—–FIN DELL —-
FUJITSU SIEMENS
—–INICIO FUJITSU SIEMENS ——-
‘.1.3.6.1.2.1.1.5.0’; # System Name
‘.1.3.6.1.2.1.1.1.0’; # System Beschreibung
‘.1.3.6.1.2.1.1.3.0’; # System Uptime
‘.1.3.6.1.2.1.1.4.0’; # System Kontaktadresse
‘.1.3.6.1.2.1.1.6.0’; # System Location
‘.1.3.6.1.4.1.231.2.10.2.1.4.0’; # Operative System
‘.1.3.6.1.2.1.25.2.2.0’; # RAM-Größe
‘.1.3.6.1.4.1.231.2.10.2.2.5.10.3.1.3.0’; # Identnummer
‘.1.3.6.1.4.1.231.2.10.2.5.2.6.0’; # CPU UsageEinige brauchbare ObjectID’s:
1.3.6.1.2.1.1.1.0 System Beschreibung
1.3.6.1.2.1.1.3.0 System Uptime
1.3.6.1.2.1.1.4.0 System Kontaktadresse
1.3.6.1.2.1.1.5.0 System Name
1.3.6.1.2.1.1.6.0 System Location
1.3.6.1.2.1.25.2.2.0 RAM-Größe
1.3.6.1.4.1.231.2.10.2.2.5.10.3.1.3.0 Identnummer
1.3.6.1.4.1.231.2.10.2.2.5.4.18.0 belegter virtueller Speicher in KBytes
1.3.6.1.4.1.231.2.10.2.2.5.4.19.0 freier virtueller Speicher in Prozent
1.3.6.1.4.1.231.2.10.2.2.5.4.20.0 freier Physikal. Speicher in KBytes
1.3.6.1.4.1.231.2.10.2.2.5.4.21.0 freier Physikal. Speicher in Prozent
1.3.6.1.4.1.231.2.10.2.5.2.6.0 CPU Auslastung in Prozent
1.3.6.1.4.1.231.2.10.2.5.2.8.0 Datum des BIOS
1.3.6.1.4.1.231.2.10.2.2.1.1.0 BIOS Hauptersion
1.3.6.1.4.1.231.2.10.2.2.1.2.0 BIOS Subversion
1.3.6.1.4.1.231.2.10.2.2.1.14.0 BIOS Revision
1.3.6.1.4.1.1597.1.2.1.1.4.0 DPT/Adaptec RAID-Controller Firmware-Version
1.3.6.1.4.1.1597.1.2.1.1.5.0 DPT/Adaptec RAID-Controller Serien-Nummer
1.3.6.1.4.1.1597.1.2.1.1.32.0 DPT/Adaptec RAID-Controller BIOS-Version
1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.11.0 Mylex Firmware Version
1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.11.0 Mylex BIOS Version—– FIN FUJITSU SIEMENS —-
UN SALUDO.
-
1 Reply
