Parameters and configuration
Parameters
| --generate_password | To generate an encrypted password (if this password is to be used later for connection, it must be entered in the configuration option "password" and the option "use_encrypted_password" must also be activated in the configuration file with 1. |
| --as_discovery_plugin | Option to use it in discovery mode. |
Configuration blocks
The configuration file is divided into the following blocks
- Configuration
- Datacenter
- Datastore
- ESX
- VM
- Rename
- Reject
- Header
Each of the blocks is specified in the configuration file by entering its parameters below these blocks, for example :
Configuration
server 192.168.100.105
user pandorafms
pass P@$5w0rd!
datacenter ha-datacenterEach block and its options are detailed below:
Configuration
Under the configuration block you can specify the following parameters
Global configuration
| server | Name or IP of the server to monitor |
| user | Account user |
| pass | Account password |
| datacenter | Datacenter where the plugin will point to |
| temporal | Path where temporary files will be stored |
| logfile | Path where the log file will be stored |
| entities_list | Path where the entities_list file will be created (more information about this file below) |
| transfer_mode | Execution mode, the two possible options are local or tentacle |
| local_folder | Path of the folder where the XML of the agents will be created for the local transfer mode (transfer_mode = local) |
| pandora_url |
pandora URL (only if required to use the event mode of the plugin) |
| api_pass | pandora api password (only if required to use the plugin event mode) |
| api_user | pandora api user (only if required to use plugin events mode) |
| api_user_pass | Pandora api user password (only if required to use plugin event mode) |
| event_mode | To activate the vCenter event monitoring, it is activated with 1. The events are copied to the Pandora FMS event list and become part of its normal flow (requires connectivity with the Pandora FMS console API). |
| event_pointer_file | Path where the event_pointer_file file will be saved. |
| tentacle_ip | tentacle IP, required if the plugin is executed in transfer_mode tentacle |
| tentacle_port | Tentacle port, default is 41121 |
| tentacle_opts | Additional options for file transfer to the specified Tentacle server |
| virtual_network_monitoring | Enables monitoring of virtual switches with value 1 |
| use_encrypted_password | Enables use of an encrypted password with value 1 |
| threads | Number of threads to be used by the plugin in agent creation |
| interval | Interval in seconds in which the plugin agents are created |
| recon_interval | Interval in seconds after which the temporary entity cache file will be automatically deleted to rescan the VMware® infrastructure. |
| group | Group where the agents will be created |
| use_ds_alias_as_name | Triggers the use of datastore agent alias as agent name with value 1 |
| statsinterval | Interval in seconds for statistics taken using the "custom_performance" option |
| flat_datastore_agents | Triggers creation of a single agent for datastores with name "VMWareDatastores" with value 1 |
| use_ds_entity_name | Enables use of Datastore name as agent name with value 1 |
Control parameters of monitorable elements
| monitor_exclusive_agents | Enable the monitoring of specific agents (these are specified in the parameters below) with value 1 |
| exclusive_esx | If monitor_exclusive_agent is enabled, it is used to specify the esxi to monitor. Its value will be an array JSON with the agents to monitor |
| exclusive_datastores | If monitor_exclusive_agent is enabled, it is used to specify the datastores to monitor. Its value will be an array type JSON with the agents to monitor |
| exclusive_vm | If monitor_exclusive_agent is enabled, it is used to specify the vm to monitor. Its value will be an array type JSON with the agents to monitor |
| scan_datastore | Activates datastore scanning with value 1 |
| scan_datacenter | Triggers datacenter scan with value 1 |
| scan_esx | Triggers esx scan with value 1 |
| scan_vm | Triggers virtual machine scan with value 1 |
Datacenter
Module activation or deactivation parameters
The following modules can be enabled or disabled in the configuration file using "enabled" or "disabled".
| ping | Checking ping to the machine that supports vCenter |
| check443 | Checking port 443 on the machine that supports vCenter |
Datastore
Module activation or deactivation parameters
The following modules can be enabled or disabled in the configuration file using "enabled" or "disabled".
| capacity | Maximum capacity of the datastore in bytes |
| freeSpace | Percentage of free space on the datastore |
| overallocation | Percentage of disk overallocation |
| freeSpaceBytes | Amount of free disk space in bytes |
| dsPathStatus | Datastore path status |
ESX
Module activation or deactivation parameters
The following modules can be enabled or disabled in the configuration file using "enabled" or "disabled".
| diskRead | Kb/s disk read rate |
| diskWrite | Rate of Kb/s written from disk |
| kernelReadLatency | Disk read latency in milliseconds |
| kernelWriteLatency | Disk write latency in milliseconds |
| deviceReadLatency | Time it takes for a storage device to respond to a data read request |
| deviceWriteLatency | Time it takes for a storage device to respond to a data write request |
| cpuInfo | General CPU information (creates a module for each ESXi CPU) |
| pciDevice | Number of assigned PCI devices |
| hbaDevice | Number of HBA (Host Bus Adapter) devices assigned to a virtual machine |
| pnicInfo | Information related to the physical network adapters (PNICs) that are configured on the ESXi host |
| vnicInfo | Information about the virtual network interfaces of the host |
| cpuUsagePercent | Percentage of current CPU usage on the host |
| memoryUsagePercent | Percentage of current RAM usage on the host |
| diskRate | Read and write data transfer rate on the host virtual disk |
| maxDiskLatency | Maximum I/O latency time on the virtual disk of the host |
| netUsage | Network data transfer rate on host virtual disk |
| systemHealthInfo | Information about the general health status of the system |
| netReceived | Amount of data received through the host network interface. netTransmitted Amount of transmitted data |
| netTransmitted | Amount of data transmitted over the host network interface |
| netPkgRx | Number of network packets received over the host network interface. netPkgTx Number of network packets received over the host network interface |
| netPkgTx | Number of network packets transmitted over the host network interface |
VM
Module activation or deactivation parameters
The following modules can be enabled or disabled in the configuration file using "enabled" or "disabled".
| virtualImagePath | Path of the virtual disk image associated with a particular virtual machine |
| toolsRunningStatus | Running status of VMware Tools on a virtual machine |
| host | hosting the virtual machines in a virtualization environment |
| connectionState | Connection status between a virtual machine and its ESXi host in a virtualization environment |
| guestState | State of the virtual machine in terms of its operating system and running applications |
| guestOS | Operating system running on the virtual machine |
| hostName | Name of the physical host on which the virtual machine is running |
| powerState | Displays whether the virtual machine is powered on or off |
| triggeredAlarmState | Displays the status of the alarms triggered in the virtual machine |
| bootTime | Displays the date and time the virtual machine started |
| vcpuAllocation | Number of virtual CPUs allocated to the virtual machine |
| cpuAllocation | Number of CPU resources assigned to the virtual machine |
| consumedOverheadMemory | Amount of memory used by the host to perform tasks related to the virtual machine |
| hostMemoryUsage | Amount of memory used by the host to perform tasks related to the virtual machine |
| maxCpuUsage | Maximum CPU usage in the virtual machine |
| maxMemoryUsage | Maximum memory usage in the virtual machine |
| memoryMBAllocation | Amount of RAM memory allocated to the virtual machine |
| memoryAllocation | Amount of memory allocated to the virtual machine |
| uptimeSeconds | Total time that the virtual machine has been running |
| memoryOverhead | Amount of memory used by the host for monitoring and management tasks of the virtual machine |