Skip to main content

4. Detecting and monitoring network and Windows devices with Discovery

Let us now look at a more complex discovery task by configuring SNMP and WMI, two protocols used to remotely monitor devices, both network (SNMP) and Windows (WMI).

The configuration process is similar to the previous one, but here got to the discovery task configuration options and look at the bottom.

 

4-1.pngpfms-management-discovery-host_and_devices-netscan_features.png

 

To enable monitoring with SNMP and WMI, activate the corresponding token and provide the data required by each protocol. SNMP has "communities" that are like access passwords. If you do not know your SNMP community, try "public". You can enter as many as you want, so that it will be tested with all of them.

The credentials for the WMI service (and others) can be defined in Profiles -> Manage agent groups -> Credential Store.

Credential stores are secure user/password stores that are used later in remote checks, device configurations, remote access, etc. So they can be reused at different points in Pandora FMS.

configuration-credential_store-register_new_key_into_keystore.png

Also enable the "Review results" token, which will allow you to see the components found by Pandora FMS in the discovery task once it is finished, showing what it has found and allowing to add it to the remote monitoring of the agent with just one click.

pfms-management-discovery-host_and_devices-netscan_with_snmp_and_wmi.png

pfms-management-discovery-host_and_devices-netscan_with_snmp_and_wmi_review.png

If you don't need more monitoring or configuration, go to metric alerting here

Did you not get the results explained in this chapter ? Go to help or support

< PREVIOUS    |    NEXT >