Monitoring with Software Agents

The Software Agents are running on the operating systems from which they collect information, performing a check for each module.

The Software Agent's own directives are used to collect certain data directly from the operating system (eg CPU usage, memory, events, etc.), executing operating system's own commands following instructions from predefined scripts.

The Pandora FMS Dataserver processes and stores in the database all the information generated and sent in XML files by the software agents.

All the configuration and parameters are stored in the pandora_agent.conf file, which is also installed locally together with your Software Agent. The basic configuration is dealt with in "Configuration of Pandora FMS Agents", the advanced configuration is explained below.

In the Software Agent configuration file the modules are defined with the following basic text structure:

module_begin
module_name <your module name>
module_type generic_data
module_exec <your command>
module_description <your description>
module_end

In the Enterprise version it is possible to remotely manage the files of the Software Agents from the Pandora FMS Web Console. The configuration of each agent is stored in the Pandora FMS server in two files: <md5>.conf and <md5>.md5, where <md5> is the hash of the software Agent name. These files are stored respectively in:

/var/spool/pandora/data_in/conf

and

/var/spool/pandora/data_in/md5

Custom fields allow you to add additional information to the agent. Custom fields can be created with the PFMS 1.0 API and the command set create_custom_field or through the Web Console in the menu Management → Resources → Custom fields → Create field.

• The options Enabled combo, Password type and Link type are mutually exclusive, that is, only one of them can be used (or none, default value).
• By activating the Display up front field, the information of the custom field will be displayed, if it has any value set, in the agent's overview. Additionally, it will be necessary to activate this token to send the Custom Fields information to the Command Center (Metaconsole).
• Enabled combo: This parameter allows you to activate the configuration of selectable parameters from a drop-down menu. Once activated, a new field will appear in the configuration window of the corresponding custom field to enter the combo values separated by commas.
• Password type: The value of the field (password) will be shown using asterisks in the Web Console.
• Link type: It allows you to add a custom field that will host a web link to be filled in by the Web Console or in a XML received by an agent. It is possible to include links in the custom fields of an XML in JSON format embedded with CDATA instructions <![CDATA[…]]>. For example, if the JSON format of the link is:

["Web name","https://example.com"]

The XML would have this syntax:

<custom_fields>
   <name>![CDATA[web]]</name>
   <value>![CDATA[["Web name","https://example.com"|]]]</value>
</custom_fields>

See “XML Validation”, the Security Architecture for the Tentacle protocol (mechanism responsible for delivering data in XML format to the PFMS Data server) and the Security Architecture for the PFMS Data server (limit the auto-creation of agents and set a password for the agent group each agent belongs to).

Custom fields can also be passed from the agent configuration file, using the tokens custom_fieldx_name and custom_fieldx_value, for example:

custom_field1_name Serial Number
custom_field1_value 56446456KS7000

The custom field called Serial Number is created by default when installing PFMS and you may create as many custom fields as needed and of each different type (simple value, web link, password type and option list type). The order of the numerical identifier of each custom field is irrelevant, you just have to ensure that the name is exactly the same:

custom_field11_name Simple custom field name
custom_field11_value Simple custom field value

custom_field12_name Custom field Link type
custom_field12_value ["Pandora FMS web site","https://pandorafms.com"]

custom_field13_name Custom field Password type
custom_field13_value My;Password;

custom_field14_name Custom field Combo type
custom_field14_value Two

In the custom fields Combo type, the value sent by the software agent must correspond exactly to one of its items, otherwise the value will not be changed.

Most important parameters for the basic configuration of Software Agents:

• server_ip: IP address of the Pandora FMS server.
• server_path: Path of the incoming input folder of the Pandora FMS server, by default /var/spool/pandora/data_in.
• temporary: Folder, default /tmp.
• logfile: Software Agent log file, by default /var/log/pandora/pandora_agent.log.
• interval: Agent execution interval, by default 300 seconds.

By default, when an agent sends data for the first time to the Pandora FMS server, it is automatically added to the group that has been defined in the agent's configuration file.

is possibleIt is possible to set a password for a group, so an agent will not be added to a group unless the correct password is specified in the agent's configuration file.

To edit and add a group password go to Management menu → Profiles → Manage agent groups → click on group name.

To add a new agent to this group, edit its configuration file and add the following configuration option group_password and restart the agent software.

According to returned data:

• generic_data: Numeric.
• generic_data_inc: Incremental.
• generic_data_inc_abs: Absolute incremental.
• generic_proc: Boolean .
• generic_data_string: Alphanumeric.
• async_data: Async Numeric.
• async_string: Asynchronous Alphanumeric.
• async_proc: Async Boolean.
• Image module: use a text string type module (generic_data_string or async_string) as a base. If the data contained in the module is an image encoded in base64, (data:image header) it will be identified as an image and will enable a link to a window to retrieve the image in the views. In addition, a content of the different images that make up the stored chains will be shown in their respective history.

The local (or software agent) modules are all “based” on the interval of their agent. However, they can take values that are multiples of that base if you modify the module_interval parameter with an integer multiply greater than zero.

The creation of local modules in the console is done through a form where, in addition to the common configuration of all modules (thresholds, type, group, etc.), there is a text box where you can specify the configuration data to be established in the configuration file. Software Agent configuration.

• When clicking on the Load basic (template) button, the content of Data configuration will be deleted with a basic template that we must modify according to the need for monitoring.
• Once modified, clicking Check (syntax) will verify that the template syntax is still correct, however the rest of the commands will not be checked.

When a module is loaded from a local component, it can have macros. If you have macros, the configuration box will be hidden and a field will appear for each macro, see more information in Templates and components

The Software Agent supports the execution of commands and scripts in postconditions mode. This means that you can perform actions depending on the value obtained in the execution of the module. The module_condition parameter is used for this, for example: module_condition < 20 add_processes.sh.

The parameter module_precondition allows you to evaluate a condition before the execution of the module and with the result decide whether the module should be executed or not, for example: module_precondition> 10 number_active_processes.sh .

There are certain modules that have a special importance, such as processes or critical services in execution. In order to monitor cases more closely, there is intensive monitoring.

It consists of warning in a shorter interval that a serious problem appeared, without the need to reduce the general interval of the agent.

Configuration in Software Agent:

• interval: Mandatory, agent sampling time in seconds, it is the general interval for all local modules.
• intensive_interval: Time in which it will notify if there is any problem, and it will always be executed in this period and if it matches the condition, it will be notified in this period of time (otherwise the data will be sent in the interval).

Module configuration:

• module_intensive_condition = <value>: If the module returns the <value> indicated in this parameter, it will report in the interval intensive previously defined. Other operators that can be used are: <, >, !=', a range of values (m,n) and =~.

The sshd service is very important since it is used to connect by shell remotely, we need to monitor its working:

 intensive_interval 10
 interval 300

 module_begin
 module_name SSH Daemon
 module_type generic_data
 module exec ps aux | grep sshd | grep -v grep | wc -l
 module_intensive_condition = 0
 module_end

If the service fails, you will be notified in the next 10 seconds. If the service is up, you will be notified in the next 5 minutes, like normally (normal interval, 300 seconds).

The Software Agent supports the definition of scheduled modules that are executed at the defined instants. The syntax used is the same as that of the crontab file.

A Software Agent is capable of performing remote checks, substituting the main PFMS server and even distributing them to broker agents.

ICMP checks or pingare very useful to know if a machine is connected or not to a network.

Unix

module_exec ping -c 1 IP_dir> /dev/null 2>&1; if [$? -eq 0 ]; then echo 1; else echo 0; fi

MS Windows®.

module_ping IP_addr

Note: module_advanced_options enables advanced options for ping.exe.

TCP checks are useful to verify whether a port of a host stay open and allow to find out whether an application connects or not to the network.

UNIX

With the nmap command and its configuration parameters in the command line, to an IP address check whether port 80 is open (response waiting time of 5 seconds):

module_begin
module_name PortOpen
module_type generic_proc
module_exec nmap 192.168.100.54 -p 80 | grep open > /dev/null 2>&1; echo $?; if [ $? == 0 ]; then echo 1; else echo 0; fi
module_timeout 5
module_end

MS Windows®

Parameters must be specified in:

• module_tcpcheck: Host to be checked
• module_port: Port to be checked
• module_timeout: Timeout for the check

Example:

module_begin
module_name TcpCheck
module_type generic_proc
module_tcpcheck 192.168.100.54
module_port 80
module_timeout 5
module_end

SNMP checks are common in monitoring network devices to check the status of interfaces, input/output bytes, etc.

Unix example

module_exec snmpget IP_dir -v 1 -c public .1.3.6.1.2.1.2.2.1.1.148 | awk '{print $4}'

Example on MS Windows®

module_snmpget
module_snmpversion 1
module_snmp_community public
module_snmp_agent 192.168.100.54
module_snmp_oid .1.3.6.1.2.1.2.2.1.1.148
module_end

This mode allows redirecting the data files generated by other Software Agents to the Pandora FMS server. The software agent that acts in Proxy Mode can also perform monitoring tasks.

Setting parameters:

• server_ip: Pandora FMS server IP address.
• proxy_mode: On (1) or Off (0).
• proxy_max_connection: number of concurrent proxy connections, by default 10.
• proxy_timeout: response timeout for the proxy, default 1 second.
• proxy_address: address on which the proxy listens.
• proxy_port: port on which the proxy listens.

The Software Agents Broker Mode allows a single agent to perform checks and manage the configuration as if it were several different agents.

When Broker Mode is activated in a Software Agent, a new configuration file is created. From then on, the original Software Agent and the new broker will be managed separately with their independent configuration files, as if they were two completely separate Software Agents on the same machine.

To create a Broker, add one or more lines with the parameter broker_agent <broker_name> (one line for each Broker).

In the Pandora FMS Web Console the Brokers are seen and managed as independent agents.

For more information visit the section Local inventory with software agents.

For more information visit the topic Log collection and monitoring.

A Software Agent is capable of receiving remote requests and executing orders.

To allow the PFMS server to send orders to the Software Agents under its charge, the following must be configured:

• udp_server: zero by default, set to one (1) to enable this functionality.
• udp_server_port: listening port in Software Agent.
• udp_server_auth_address: IP address of the Pandora FMS server

Restart the Software Agent for the changes to take effect.

You must use the script located at:

/usr/share/pandora_server/util/udp_client.pl

It can be executed from the command line or used in an alert, through the command that comes preconfigurada in the Remote agent control console.

In addition to the Software Agent service restart action, custom actions can be specified.

process_<order_name>_start command

Unlike server plugins, executed by Pandora FMS server, Software Agent plugins report one or several modules at the same time.

In MS Windows®, all plugins registered by default are programmed in VBScript, to execute them the cscript.exe interpreter is used.

Unix plugins are located by default in the agent directory:

/etc/pandora/plugins

It is possible to add a token in the agent plugins configuration that when enabled allows the option to 'encapsulate' the plugin definitions inside the module_begin and module_end tags.

This enabled token allows you to insert configuration blocks such as module_interval or module_crontab, among others.

Plugins can be created in any programming language. Only the general rules and specific rules should be taken into account for its development.

Nagios has a large number of plugins that you can use with Pandora FMS. One way to do this is to use the remote plugins with the Plugin Server, using the Nagios compatibility.

A unique module in Pandora FMS is the type called keep_alive, used to alert if a Software Agent has stopped sending information.

You must go to the modules tab (Management → Manage agents → click on agent name → Modules).

Click Create module and select Create a new data server module → Create → enter the name of the new module → Create.

Commands with long output, such as top or netstat -n can be fully captured by a module and reproduced as-is. The module must be configured as text type, example:

module_begin
module_name process_table
module_type generic_data_string
module_exec ps aux
module_description Command snapshot of running processes
module_group System
module_end

This method allows defining modules of the string type (generic_data_string or async_string) that contain images in text format with a base64 encoding, being able to display said image instead of a specific result.

For example:

#!/bin/bash
echo "<module>"
echo "<name>Actual leader</name>"
echo "<type>async_string</type>"
echo "<data><![CDATA[data:image/jpeg;base64,/9j/4AAQSkZ....]]></data>"
echo "</module>"

Write that content to a file on the agent (or distribute by collections) and run it like this:

module_plugin <complete path to the file>

The module_proc parameter checks if a certain process name is running on this machine. Example:

module_begin
module_name CMDProcess
module_type generic_proc
module_proc cmd.exe
module_description Process Command line
module_end

The parameter module_async yes must be added:

  module_begin
  module_name CMDProcess
  module_type generic_proc
  module_proc cmd.exe
  module_async yes
  module_description Process Command line
  module_end

The Watchdog functionality for MS Windows® allows to restart an interrupted process, example:

  module_begin
  module_name Notepad
  module_type generic_data
  module_proc notepad.exe
  module_description Notepad
  module_async yes
  module_watchdog yes
  module_user_session yes
  module_start_command "%SystemRoot%\notepad.exe"
  module_startdelay 3000
  module_retrydelay 2000
  module_retries 5
  module_end

The module_service parameter checks if a certain service is running on the machine. The definition of a module using this parameter would be:

  module_begin
  module_nameService_Dhcp
  module_type generic_proc
  module_service Dhcp
  module_description Service DHCP Client
  module_end

To notify immediately when a process stops working, the parameter module_async yes must be added (see common rules at the beginning of the Windows section):

  module_begin
  module_nameService_Dhcp
  module_type generic_proc
  module_service Dhcp
  module_description Service DHCP Client
  module_async yes
  module_end

It works in a similar way to the Process Watchdog. Example:

  module_begin
  module_name ServiceSched
  module_type generic_proc
  module_service Schedule
  module_description Service Task scheduler
  module_async yes
  module_watchdog yes
  module_end

The watchdog definition for services does not require any additional parameters like the process parameter, because that information is already inside the service definition.

When installing the PFMS Software Agent for MS Windows® the necessary basic modules are included, some of them come active and others must be activated by Remote Configuration (or locally editing the agent's .conf file).

Back to Pandora FMS documentation index