Pandora FMS Community

Error en client server: Error sending file '/tmp/xxxx.data'

admincauce · 24 jul 2019, 18:10 · 6 mensajes · 62 visitas

  1. Inicio del debate

    Hi to everyone I have Pandora Server configured and I have the pandora agent deployed on some servers to be able to monitor them. From the Pandora server, I have already started the tentacle_server process so that I can open port 41121 where the traffic between client and server machines is made. From any client server I can telnet to the server's IP through port 41121 and connect correctly. The problem comes when I try to manually launch the data buffer from the client to the server using the following command: root @ cnfwww00 / usr / bin $ tentacle_client -a 10.203.230.2 /tmp/server01.1554121387.data [err] Connection from 10.200.2.3 unexpectedly closed. This is the error that give me. If I start the pandora agent on the client server, it gives me the following error repeatedly in the pandora agent log file [error] - Error sending file '/tmp/server01.1553781368.data': [err] Connection from 10.200.2.3 unexpectedly closed. I don't know what I'm missing for the agent to contact the server and send that data correctly. Thanks in advanced. Best regards

  2. Hello admincauce Can you ping form the agent to the server and from the server to the agent? If you can please send me the config file. Best regards Diego

  3. Hello admincauce Can you ping form the agent to the server and from the server to the agent? If you can please send me the config file. Best regards Diego

    Thank you very much for the answer DiegoM Pandora's server and the clients I want to monitor are on different VLANs in our infrastructure. I ping from the pandora server to the servers where the agent is installed, but vice versa I do not ping, and this is because surely at the FW level that traffic is cut. Should I have ICMP traffic enabled between agents and pandora server? Anyway, I send you my pandora agent configuration file to see if I am missing something in that configuration. Thank you very much in advance.

    agent_pandora.txt

  4. Hello admincauce Probably there's a problem with the firewall, you dont need to have the ICMP traffic enabled, but is necesary to have the tentacle port (41121) opened, take a look on the echo requests of tentacle too. Good Luck! Diego

  5. Hello admincauce Probably there's a problem with the firewall, you dont need to have the ICMP traffic enabled, but is necesary to have the tentacle port (41121) opened, take a look on the echo requests of tentacle too. Good Luck! Diego

    Thanks for the reply, As I put in the initial thread, through telnet I can connect from any client to the pandora server through port 41121. telnet 41121 Should it also be allowed in reverse, from the server to the clients? On the pandora server I started the tenacle_server service that was not started, and I successfully opened port 41121 and already from client I could telnet to 41121 being able to connect. Do I have to start some other service on the client side? Is the agent configuration file correct? Thanks again

  6. Hello again admincauce You dont have to allow the reverse from server to client, but it can produce some errors in the future, so I recommend you to allow it. On the client side there's no more services other than the pandora_agent_daemon for the software agent. The configuration file from the agent seems to be OK for me. I hope that's all! Enjoy PandoraFMS! Diego

Entra en tu cuenta para publicar.