Hi, I am testing out Pandora FMS v7 (170324) virtual appliance to see if we can replace our old nagios monitoring, I have been able to get the basics going, but when I add a module to a agent it just keeps coming up "non initialised module" The device I am trying to add is a network switch and I have added Host Alive and Host latency and they have come up OK, but when I add any SNMP checks they do not initialise. I have checked in the pandora_server.conf and log files and can't seem to see anything relevant or an error that gives me more information, when I turned the verbose level to 10 I get "Updating module Sysname (ID 46) on error." in the log but no other information about the error. Is this because it's the community version? Any help on where I can look to find out what's happening appreciated to help me move on to the next test. Thanks
non initialised module
Tsupport · 25 oct 2018, 6:31 · 4 mensajes · 59 visitas
- Inicio del debate
Hi, I am testing out Pandora FMS v7 (170324) virtual appliance to see if we can replace our old nagios monitoring, I have been able to get the basics going, but when I add a module to a agent it just keeps coming up "non initialised module" The device I am trying to add is a network switch and I have added Host Alive and Host latency and they have come up OK, but when I add any SNMP checks they do not initialise. I have checked in the pandora_server.conf and log files and can't seem to see anything relevant or an error that gives me more information, when I turned the verbose level to 10 I get "Updating module Sysname (ID 46) on error." in the log but no other information about the error. Is this because it's the community version? Any help on where I can look to find out what's happening appreciated to help me move on to the next test. Thanks
Good morning Tsupport, First of all thanks for trying our solution for your monitoring. Can you please tell me exactly the version you have and the MR too? There are many possible problems why the monitors aren't going ok. Can you please show us the servers status? It may be caused because the network server its delayed or not going ok. Have you initiated that server? Also, try to increaed the "threads" of the servers to 3 (never more than 5) so the use of the machine is better and doesn't leave any modules to run. When i receive the information from you will try to see next level of support to your problem. See attached the data i requiere. Best regards, Alberto
[
](//pandorafms.com/community/media/forum/10325/26702=2495-VersionPandora.PNG)
[
](//pandorafms.com/community/media/forum/10325/26702=2496-StatusServers.PNG)
Hi, The version I have installed is 7.0NG Build PC170324, it's the VMware appliance I was testing. I have attached screen shots that you asked for. I'm not sure why the updated is 10 hours when I go into the individual agents its says that the last check was seconds ago. I had seen in other replies to this issue about the threads, have checked in the config file that the network server is set to 1 and the network threads were set to 4 and icmp checks are 3, are those the threads that you are meaning?
[

](//pandorafms.com/community/media/forum/10688/26713=2500-Pandora1.png)
[

](//pandorafms.com/community/media/forum/10688/26713=2501-Pandora2.png)
Hi, The version I have installed is 7.0NG Build PC170324, it's the VMware appliance I was testing. I have attached screen shots that you asked for. I'm not sure why the updated is 10 hours when I go into the individual agents its says that the last check was seconds ago. I had seen in other replies to this issue about the threads, have checked in the config file that the network server is set to 1 and the network threads were set to 4 and icmp checks are 3, are those the threads that you are meaning?
Good morning Tsupport, First of all you need to update to latest version of Pandora FMS, and the MR too. Here i leave you the URL with the versions you need to install to upgrade Pandora. If you didn't do much, i recommend you to reinstall directly Pandora FMS on version 7.728 with MR 21. For that you just need to get the lastest packeage and install il. If you want to continue with the installed one, you'll need to update each package one by one (701,702,703..) and after update each MR (1,2,3...) Also i can see you have all servers down, have you did the "/etc/init.d/pandora_server start", seams Pandora Server is not running. Please tell us what method you''ll use for updating to latest version so we can give you more advise to do it correctly. but first of all, try to start the server to see if the problems solves by it self. Alberto
Entra en tu cuenta para publicar.


