Pandora FMS Community

Agent Communication on Windows Domain Controllers

glenthedog · 21 jun 2016, 18:59 · 6 mensajes · 80 visitas

  1. Inicio del debate

    Hi, I've been setting up agents on our Windows 2008 R2 servers, and all are working fine with the exception of the agents deployed to domain controllers. I can install the agent on the DC's without issue, and the service also runs OK on these server. The DC's also appear in the Pandora console and look OK for about five minutes, but they then stop communicating and the console reports that they have passed their ETA. The communication between the DC's and Pandora server is working fine, with no firewalls in the way, and as I've mentioned other servers (non DC's) on the same subnets work fine and the agents connect to the Pandora console and communicate properly. Has anyone else seen this on Windows DC's? Is it a possibility that the DC is using a port that Pandora uses? It's also pretty weird that the DC's agent(s) register with the console initially, but then never re-communicate at the specified update time thereafter. I've checked the agent log and can't see anything and the agents on the DC's continue to run - they just don't connect to the server. Cheers, Kenny

  2. Hello, I have the same problem, in our three domain controllers don't run correctly, we have a rule for restart pandora agent every hour, but in the next 5 min appears in unknow module. Our DC are W2012R2. Any idea? thanks

  3. Hi both of you. To try to find out where is the fault I recommend you do the following (you can start checking from the last point if you want): - In the configuration of the agents change the token "debug 0" to "debug 1" to check the XML file that should be sent to the server. The file is saved by default in "C:Program Filespandora_agenttemp"  with extension ".data". There must be a debug log too. - If all modules are right, you can try to stop the Pandora server and see if in the directory "/var/spool/pandora/data_in" arrive files ".data". - If the files arrive to the server correctly see if the server process the files ".data" or are being queued. - If the ".data" are processed you can try to put the token "verbosity 10" and check the log "/var/log/pandora/pandora_server.log" to see if you get some information. Something similar to your problem is posted in the spanish forum (link here). Maybe it's the same issue. Kind regards, Enrique.

  4. Hi, doesn't work, i try to debug and see the log and all is normal, Pandora server received the .dat and its ok, but for the next contact (1 min in my case) all modules appear in unknown, and still in this state until restart the service :/ I try to open the FW with port 41121 (Tentacle) inbound and outbound and nothing. ONLY happens in my domain controller, in my case 2012R2, any idea?

    (Ya he visto el post en español) creo que es lo mismo, pero posiblemente en este foro haya más ideas,no¿?

  5. Hi gairhald, I'm not sure if I understood you. You mean that all the checks worked properly when the agent went to "unknown" status? Kind regards, Enrique.

  6. finally i resulted that if remove some modules from pandora.conf (in my DC 2012R2) like , the rest of modules  works ok and pandora won't show more unknowns

    # Number processes
    module_begin
    module_name Number processes
    module_type generic_data
    module_exec tasklist | gawk "NR > 3 {print$0}" | wc -l
    module_description Number of processes running
    module_min_warning 175
    module_max_warning 249
    module_min_critical 250
    module_max_critical 300
    module_end
    

    The rest of windows 2012R2 don't need to remove this module

Entra en tu cuenta para publicar.