Hello together, i have problems with enabling "wmi monitoring" in the free version. My situation: -pandora_server.conf located at /etc/pandora/ has correct entry "wmiserver 1" -wmic in terminal session brings correct results -using agent brings correct results But the "WMI Wizard" always says "ERROR: Unable to do WMI explorer": Tried to use "domainnameuser" and "domainname/user" for authenticating -> no chance Server Reboot -> no chance I have multiple special characters in the password. Maybe this is the problem? I have tested many other monitoring solutions. I would like to stay with Pandora, because it seems the most suitable one for my equipment. Hope you can give me a hint! Greetings, Markus Version Info: Pandora FMS Build PC151231 Pandora FMS Version v6.0dev Homedir /var/www/html/pandora_console HomeUrl http://192.168.10.49/pandora\_console/ PHP Version 5.3.3 DB Table tagente 175 DB Table tagent_access 874 DB Table tagente_datos 1003096 DB Table tagente_datos_string 9849 DB Table tagente_estado 389 DB Table tagente_modulo 389 DB Table talert_actions 4 DB Table talert_commands 12 DB Table talert_template_modules 0 DB Table tevento 2309 DB Table tlayout 0 DB Table tserver 5 DB Table treport 0 DB Table ttrap 0 DB Table tusuario 3 DB Table tsesion 11 DB Schema Version 5.1SP3 DB Schema Build PD150624 Enterprise installed PandoraDB Last run 2015/09/30 15:01:03 Update Key PANDORA-FREE Updating code path Path where the updated code is stored Current Update # 412
ERROR: Unable to do WMI explorer
Markus Moos · 30 sept 2015, 17:11 · 10 mensajes · 106 visitas
- Inicio del debate
Hi Markus, Have you tried the command "SELECT AvailableBytes from Win32_PerfRawData_PerfOS_Memory" through wmic? Show me what you get doing it, maybe I can help you ;) Regards, Emilio.
Hi Emilio, thanks for your response! I did yet a "select model from Win32_ComputerSystem" through wmic. You can view the result in the attached "Pandora.pdf". But i tried again with your suggestion and wmic reports 1442066432 AvailableBytes ;-) So wmic access via terminal seems OK. The problem is in the pandora console: 1. WMI modules do not init (status is always blue saying "NOT INIT: 0") 2. WMI wizzard says "ERROR: Unable to do WMI explorer" I don't know what's missing in my config or what's wrong. Greetings, Markus
Hi Markus, I'm not 100% sure, but I think that I know what may be your problem... Have you tried changing the slash at Username? I mean: "GROUP/Administrator" instead of "GROUPAdministrator". Try it and lemme know ;) Regards, Emilio.
Hi Emilio, i have tested this and there is no difference. BTW look again in my first post! In this post i had written: "Tried to use "domainnameuser" and "domainname/user" for authenticating -> no chance" :-) Greetigs ...
Hi Markus, My bad, I read it hours ago and forgot about your first post few hours later LOL I should have reread (I don't even know if this is correct)... So, that leaves me with no answer but this: Try to keep going but just with "Administrator" at the Username, without the GROUP. If your wmic is working, Pandora should work too! Regards, Emilio.
Hi Emilio, after some time the problem is solved: using "[email protected]" was the solution !!! I keep you informed if the rest will work OK ... Thanks so far for your help. Grettings. Markus
Hi Markus, I hope that everything keeps working. And thank you for the answer, maybe this post can help someone else ;) Regards, Emilio.
Hi Emilio, unfortunately now i have the same problem like "Masateru KUWATA". I also have no status change, it stays blue always saying "NOT INIT: 0 I will close my thread and follow the other thread. Maybe you/we get the right solution. Greetings, Markus
Hi Markus, Yeah, of course! That's the spirit! Close this one and let's keep our eyes at the other one, maybe Kuwata, you and me are able to work something out! :D Regards, Emilio.
Entra en tu cuenta para publicar.
