I understand the basics of monitoring the devices and how the parameters go from Norman to warning to Critical. However im confuse when its regressive such in Free Disk Space. The default settings start for warning with a Min of 20.00 and Max of 30.00and for Critical Status is 0.0 and Max of 20.00. Does this means that when the Free Percentage is below 20% will become a critical state right? My problem is that when i change the Max Value to 10.00 although my device still at 9% it the state status goes back to normal instead of remain in Critical. Can Anybody Help me understand please?
Warning, Critical Alerts Setup for FreeDisk Space
gabriel-m · 19 may 2014, 22:54 · 6 mensajes · 59 visitas
- Inicio del debate
Hello If you set this: min_warning 20 max_warning 30 max_critical 10 min_critical 0 Then the module would adopt normal status between 10 and 20. This is an error of configuration for the tresholds. To set them correctly you can either set: min_warning to 10 or max_critical to 20 Regards Ivo
I changed my parameters to see what would it do but im still confuse about how would it work, in this case im guessing the Max in either warning and Critical do not count or are read by pandora?
Hello All thresholds are read by pandora. module_min_warning This is the minimum value which will make the module state go to the 'warning' status. This guideline is not compulsory. If the module doesn't exist in the dashboard, then it's going to get created automatically when the learning mode is in use. module_max_warning This is the maximum value which will make the module go to 'warning' status. This guideline is not compulsory. It uses a <= (less than) operator. module_min_critical This is the minimum value which will make the module state go to 'critical' status. This guideline is not compulsory. This uses a > operator, not a >= operator. module_max_critical This is the maximum value which will make the module state go to 'critical' status. This guideline is not compulsory. This uses a <= operator. Regards Ivo
did you meant to write that the Critical Min value is (greater than) 0 should be critical but then all the values are grater that 0.00
Hello Witch is the min_warning value then. Please state all values for the tresholds. Regards Ivo
Entra en tu cuenta para publicar.
