Hola, Cuando empece a utilizar pandora hace unos meses hice unos modulos para monitorizar maquinas virtuales en sevidores Hyper-V, ahora los he refundido en uno solo, y antes de subirlos a la libreria quisiera exponer la estrategia y diseño seguidos por si a alguien se le ocurre algo. He intentado documentar en el modulo la informacion necesaria, pero en cualquier caso esta es: En la version 3 de HyperV ha aparecido la replicacion de maquinas, por ello determinamos en primer lugar en que version de HyperV estamos, ya que tambien se utiliza un 'Namespace' de WMI diferente, segun la version del sistema operativo. Si estamos en HyperV 1 o 2 (Win2008,Win2008R2) simplemente veremos el estado de una maquina. Si estamos en HyperV 3 (Win2012) y una maquina esta replicandose lo que queremos saber es si su estado de replica es normal, para ello nos basta con saber su estado de replica en el host donde se ejecuta y no hace falta ver el estado en el host donde se esta replicando, en el modulo esta comentado y se puede activar si se desea. Si la maquina no tiene replica, pues monitorizamos su estado. He intentado poner los valores de cadena para estado Warning/Critical pero al parecer no esta soportado, se tendra que hacer a mano. Esta probado en 2 Host con Windows Server 2012 Standard, con maquinas replicandose, y otro con HyperV 2008 R2. Os pego el codigo. Un saludo. ' MonitorHyperV ' Check Hyper-V version and virtual machines status. ' Controla la version de Hyper-V y el estado de las maquinas virtuales ' Josep A. Ferrando ([email protected]) 2013 Option Explicit On Error Resume Next ' Variables Dim strComputer, objWMIService, objItem, colItems Dim i, HyperV Dim Language Dim strEnabled, StrDisabled, strOther Dim strNormal, strWarning, strCritical Dim strDescPre1, strDescPos1, strDescPre2, strDescPos2 'Start of module / Inicio del modulo Language = "I" Initialize Monitor 'End of module / Fin del modulo 'Subprograms & Functions / Subprogramas y Funciones Sub Initialize ' Initialize configuration values / variables ' Inicializar valores / variables de configuracion strComputer = "." 'Local Computer / Ordenador local Set objWMIService = GetObject("winmgmts:\" & strComputer & "rootCIMV2") Set colItemS = objWMIService.ExecQuery("SELECT Caption, Version FROM Win32_OperatingSystem") 'Obtain Operating System Version / Obtener Version Sistema Operativo 'Windows 2008 - HyperV Server 2008 - 6.0.xxxx = HyperV 1.0 'Windows 2008 R2 - HyperV Server 2008 R2 - 6.1.xxxx = HyperV 2.0 'Windows 2012 - HyperV Server 2012 - 6.2.xxxx = HyperV 3.0 For Each objItem in colItems Select Case Left(objItem.Version , 3) Case "6.2" HyperV = 3 case Else HyperV = 2 End Select 'Debug 'Wscript.Echo "-----------------------------------" 'Wscript.Echo "Op. System : " & objItem.Caption 'Wscript.Echo "OS Version : " & objItem.Version 'Wscript.Echo "HyperV Version: " & HyperV 'Wscript.Echo "-----------------------------------" Next Select Case Language Case "I" strEnabled = "Enabled" strDisabled = "Disabled" strOther = "Other" strNormal = "Normal" strWarning = "Warning" strCritical = "Critical" strDescPre1 = "HyperV machine " strDescPos1 = " status" strDescPre2 = "HyperV machine " strDescPos2 = " replication health" Case "E" strEnabled = "Encendida" strDisabled = "Apagada" strOther = "Otro" strNormal = "Normal" strWarning = "Advertencia" strCritical = "Crítico" strDescPre1 = "Estado máquina HyperV " strDescPos1 = "" strDescPre2 = "Estado replicación máquina HyperV " strDescPos2 = "" Case "V" strEnabled = "Encesa" strDisabled = "Apagada" strOther = "Altre" strNormal = "Normal" strWarning = "Advertència" strCritical = "Crític" strDescPre1 = "Estat màquina HyperV " strDescPos1 = "" strDescPre2 = "Estat replicació màquina HyperV " strDescPos2 = "" End Select End Sub Sub Monitor Select Case HyperV Case 2 ' HyperV 1.0/2.0 has no replication , then monitor the state of machines ' HyperV 1.0/2.0 no tiene replicacion, entonces monitorizamos el estado de las maquinas ' EnabledState values / Valores EnabledState - http://msdn.microsoft.com/en-us/library/hh850116(v=vs.85) ' 0 Unknown ' 1 Other ' 2 Enabled ' 3 Disabled ' 4 Shutting Down ' 5 Not Applicable ' 6 Enabled but Offline ' 7 In test ' 8 Deferred ' 9 Quiesce '10 Starting Set objWMIService = GetObject("winmgmts:\" & strComputer & "rootvirtualization") Set colItems = objWMIService.ExecQuery( "SELECT * FROM Msvm_ComputerSystem",,48) For Each objItem in colItems 'Wscript.Echo "- DEBUG ----------------------------------" 'Wscript.Echo "HyperV : " & HyperV & objItem.ElementName Wscript.Stdout.WriteLine "" Wscript.Stdout.WriteLine " " Wscript.Stdout.WriteLine " " Wscript.Stdout.WriteLine " " Select Case objItem.EnabledState Case 2 : Wscript.Stdout.WriteLine " " Case 3 : Wscript.Stdout.WriteLine " " Case Else Wscript.Stdout.WriteLine " " End Select Wscript.Stdout.WriteLine "" Next Case 3 ' HyperV 3.0 has replication, then monitor replication status of machines ' that are in these host (Primary) and replicated in other host (Recovery) ' HyperV 3.0 tiene replicacion, entonces monitorizamos el estado de la replicacion de las maquinas ' que estan en este host (Primary) y replicandose en otro host (Recovery) ' If replication is not enabled, then monitor the state of machines ' Si no tienen la replicacion habilitada monitorizamos su estado ' ReplicationMode values / Valores ReplicationMode - http://msdn.microsoft.com/en-us/library/hh850116(v=vs.85) ' 0 None ' 1 Primary ' 2 Recovery ' 3 Test replication ' ReplicationHealth ' 0 Not applicable ' 1 Ok ' 2 Warning ' 3 Critical Set objWMIService = GetObject("winmgmts:\" & strComputer & "rootvirtualizationv2") Set colItems = objWMIService.ExecQuery( "SELECT * FROM Msvm_ComputerSystem",,48) For Each objItem in colItems 'Wscript.Echo "- DEBUG ----------------------------------" 'Wscript.Echo "HyperV : " & HyperV & " RMode : " & objItem.ReplicationMode & " " & objItem.ElementName Select Case objItem.ReplicationMode Case 1 ' Primary Wscript.StdOut.WriteLine "" Wscript.StdOut.WriteLine " " Wscript.StdOut.WriteLine " " Wscript.Stdout.WriteLine " " Select Case objItem.ReplicationHealth Case 2 : Wscript.Stdout.WriteLine " " Case 3 : Wscript.Stdout.WriteLine " " Case Else Wscript.Stdout.WriteLine " " End Select 'Wscript.Stdout.WriteLine " " 'Wscript.Stdout.WriteLine " " Wscript.StdOut.WriteLine "" Case 2 ' Secondary Monitor on Host with Primary 'Wscript.StdOut.WriteLine "" 'Wscript.StdOut.WriteLine " " 'Wscript.StdOut.WriteLine " " 'Wscript.Stdout.WriteLine " " 'Select Case objItem.ReplicationHealth ' Case 2 : Wscript.Stdout.WriteLine " " ' Case 3 : Wscript.Stdout.WriteLine " " ' Case Else ' Wscript.Stdout.WriteLine " " 'End Select 'Wscript.Stdout.WriteLine " " 'Wscript.Stdout.WriteLine " " 'Wscript.StdOut.WriteLine "" Case 0 ' None Wscript.Stdout.WriteLine "" Wscript.Stdout.WriteLine " " Wscript.Stdout.WriteLine " " Wscript.Stdout.WriteLine " " Select Case objItem.EnabledState Case 2 : Wscript.Stdout.WriteLine " " Case 3 : Wscript.Stdout.WriteLine " " Case Else Wscript.Stdout.WriteLine " " End Select Wscript.Stdout.WriteLine "" Case 3 ' Testing Case Else ' Monitor Host Wscript.Stdout.WriteLine "" Wscript.Stdout.WriteLine " " Wscript.Stdout.WriteLine " " Wscript.Stdout.WriteLine " " Select Case objItem.EnabledState Case 2 : Wscript.Stdout.WriteLine " " Case 3 : Wscript.Stdout.WriteLine " " Case Else Wscript.Stdout.WriteLine " " End Select Wscript.Stdout.WriteLine "" End Select Next Case Else End Select End Sub
Inicio del debate
