Is there any standard way to configure SNMP for the pandora server? is it necessary to be configure to work with the console and the servers that host the agents?
SNMP Configuration setup
gabriel-m · 13 dic 2012, 21:57 · 25 mensajes · 111 visitas
- Inicio del debate
Hi Gabriel M. Could you run this command from Pandora server command line: snmpwalk -v 1 -c community ip_server Replace community and ip_server by correct values and paste the output, please. Regards.
I get a lot of output like this with the command ; however i didnt pasted it all cuz its a whole lot of the same type of output lines snmpwalk -v 1 -c ccapublic 192.168.1.12 iso.3.6.1.2.1.7.5.1.1.0.0.0.0.54974 = IpAddress: 0.0.0.0 iso.3.6.1.2.1.7.5.1.1.0.0.0.0.54985 = IpAddress: 0.0.0.0 iso.3.6.1.2.1.7.5.1.1.0.0.0.0.54989 = IpAddress: 0.0.0.0 iso.3.6.1.2.1.7.5.1.1.0.0.0.0.55002 = IpAddress: 0.0.0.0 iso.3.6.1.2.1.7.5.1.1.0.0.0.0.55003 = IpAddress: 0.0.0.0 iso.3.6.1.2.1.7.5.1.1.0.0.0.0.55005 = IpAddress: 0.0.0.0 iso.3.6.1.2.1.7.5.1.1.0.0.0.0.55008 = IpAddress: 0.0.0.0 iso.3.6.1.2.1.7.5.1.1.0.0.0.0.55012 = IpAddress: 0.0.0.0 iso.3.6.1.2.1.7.5.1.1.0.0.0.0.55022 = IpAddress: 0.0.0.0i iso.3.6.1.2.1.25.6.3.1.5.252 = Hex-STRING: 07 D9 04 12 0B 08 14 00 iso.3.6.1.2.1.25.6.3.1.5.283 = Hex-STRING: 07 D8 08 0F 09 03 06 00 iso.3.6.1.2.1.25.6.3.1.5.284 = Hex-STRING: 07 D8 08 0F 09 03 06 00 iso.3.6.1.2.1.25.6.3.1.5.285 = Hex-STRING: 07 DC 05 1F 0C 1D 16 00 iso.3.6.1.2.1.25.6.3.1.5.286 = Hex-STRING: 07 D8 08 0F 09 03 06 00 iso.3.6.1.2.1.25.6.3.1.5.287 = Hex-STRING: 07 DC 05 1F 0B 37 06 00 iso.3.6.1.2.1.25.6.3.1.5.288 = Hex-STRING: 07 DB 04 19 0B 22 22 00 iso.3.6.1.2.1.25.6.3.1.5.289 = Hex-STRING: 07 D8 08 0F 09 03 06 00 iso.3.6.1.2.1.67.1.1.1.1.1 = Hex-STRING: 4D 69 63 72 6F 73 6F 66 74 20 49 41 53 32 2E 30 00 iso.3.6.1.2.1.67.1.1.1.1.2 = Gauge32: 902847982 iso.3.6.1.2.1.67.1.1.1.1.3 = Gauge32: 902847982 iso.3.6.1.2.1.67.1.1.1.1.4 = INTEGER: 4 iso.3.6.1.2.1.67.1.1.1.1.5 = Counter32: 0 iso.3.6.1.2.1.67.1.1.1.1.6 = Counter32: 0 iso.3.6.1.2.1.67.1.1.1.1.7 = Counter32: 0 iso.3.6.1.2.1.67.1.1.1.1.8 = Counter32: 0 iso.3.6.1.2.1.67.1.1.1.1.9 = Counter32: 0 iso.3.6.1.2.1.67.1.1.1.1.10 = Counter32: 0 iso.3.6.1.2.1.67.1.1.1.1.11 = Counter32: 0 iso.3.6.1.2.1.67.1.1.1.1.12 = Counter32: 0 iso.3.6.1.2.1.67.1.1.1.1.13 = Counter32: 0 iso.3.6.1.2.1.67.1.1.1.1.14 = Counter32: 0 iso.3.6.1.2.1.67.2.1.1.1.1 = Hex-STRING: 4D 69 63 72 6F 73 6F 66 74 20 49 41 53 32 2E 30 00 iso.3.6.1.2.1.67.2.1.1.1.2 = Gauge32: 902847982 iso.3.6.1.2.1.67.2.1.1.1.3 = Gauge32: 902847982 iso.3.6.1.2.1.67.2.1.1.1.4 = INTEGER: 4 iso.3.6.1.2.1.67.2.1.1.1.5 = Counter32: 0 iso.3.6.1.2.1.67.2.1.1.1.6 = Counter32: 0 iso.3.6.1.2.1.67.2.1.1.1.7 = Counter32: 0 iso.3.6.1.2.1.67.2.1.1.1.8 = Counter32: 0 iso.3.6.1.2.1.67.2.1.1.1.9 = Counter32: 0 iso.3.6.1.2.1.67.2.1.1.1.10 = Counter32: 0 iso.3.6.1.2.1.67.2.1.1.1.11 = Counter32: 0 iso.3.6.1.2.1.67.2.1.1.1.12 = Counter32: 0 iso.3.6.1.2.1.67.2.1.1.1.13 = Counter32: 0
Ok Gabriel M. Could you attach a screenshot with SNMP module configuration in Pandora FMS web console, please? Paste the output of that commands:
# cat /etc/pandora/pandora_server.conf | grep snmpget # which snmpgetRegards.
Not sure what are u asking me, i know how to use the tools to and then select SNMP for a specific device and do you want me to do the cat command from my terminal?
This is the output of cat /etc/pandora/pandora_server.conf | grep snmpget
[

](//pandorafms.com/community/media/forum/0/14281=361-Screenshot-from-2012-12-17-165903.png)
Ok so i added few modules from via SNMP through the pandora console and they seem to have a little yellow warning sign and i also added one manually that is actually sending information, ( I have no idea what type of information) but when i added i did an snmp walk from that page and it gave me and OID and then i clicked create. Im really confuse now, does this means that is something wrong with the templates?
[

](//pandorafms.com/community/media/forum/0/14282=362-SNMP_By_Module.png)
Hi, Yellow warning icon means that the module is in not initialized status, because that module has never reported data yet. If you do a snmpwalk, and you choose one OID from list, it should report data. You can test it from server command line, running this command: # snmpget -v 1 -c ccapublic 192.168.1.12 OID You have to replace OID by the string which is returning not-initialized data. Paste the output here. Regards.
thats my main issue when i do an snmpwalk to pick my OID i get no output to choose from the SNMP Explorer page
[

](//pandorafms.com/community/media/forum/0/14285=363-SNMPwalk.png)
What version of Pandora FMS are you using? This seems to be a bug in an older version. Try to update to the last version.
i do get an output when i put the right OID and snmp community when i do that on the command line and also in the console from the agent configurartion SVR12 -Modules name but like i said when i do it from the SNMP explorer i get no output to choose modules from
[

](//pandorafms.com/community/media/forum/0/14289=364-OID.png)
im running v4.02
would it be something wrong on the snmp explorer.php?
[

](//pandorafms.com/community/media/forum/0/14291=365-define_extensions.png)
My Pandora FMS version: Pandora FMS v4.0.2 - Build PC120626 I do a snmpwalk with SNMP Explorer and it works fine!
[

](//pandorafms.com/community/media/forum/0/14292=366-snapshot2.png)
[

](//pandorafms.com/community/media/forum/0/14292=367-snapshot3.png)
do you think it could be related to Ubuntu, the first pandora system i worked on it was installed in a SuSe operative system and it worked just fine, i looked the differences in the config files for the servers and i couldnt really find a difference and i guess we are running out of options, is very puzzling, because my snmp-explorer wont give me an error or nothing, is just a blank page were it should be the OID to pick modules
What web explorer are you using? Could you test with another one? Regards.
I tried on IE9, Chrome and firefox, from 2 different machines, so u think it could be a bug in this version?
We have the same version of Pandora FMS. Try to do snmpwalk again and send me your pandora_console.log and pandora_server.log, please.
I dont really get any errors but here they are
[

](//pandorafms.com/community/media/forum/0/14297=368-PFMS-Logs.png)
[

](//pandorafms.com/community/media/forum/0/14297=369-pfms-Console-log.png)
Run this commands and paste its output: Version of php:
php5 -vAnd php5 packages installed in your server: For Suse:
# rpm -qa | grep php5For Ubuntu/Debian:
# dpkg -l | grep php5
Entra en tu cuenta para publicar.









