I have a disk usage monitor with warning from 80-90 and critical from 91-100 at 90, it shows green... Is this somewhere doing an (if value < max_warn) {...} thing where it should be <= or what? I assume this is in pandora server, installed from: pandorafms_server-4.0.2-1.noarch.rpm
Warning range doesn't trigger at top?
bluefoxicy · 30 jul 2012, 18:41 · 3 mensajes · 68 visitas
- Inicio del debate
Start the range for the critical min value at 90.1 Probably the module is giving a value like 90.2 or whatever between 90 and 91 which are not included in the ranges you setup so that's why it shows at normal status. Regards
Start the range for the critical min value at 90.1 Probably the module is giving a value like 90.2 or whatever between 90 and 91 which are not included in the ranges you setup so that's why it shows at normal status. Regards
The module cuts the decimal off the end. I should just warn on 80-90 and critical on 90-100, instead of critical 91-100 anyway. Interestingly, when you invert these (i.e. warn from 10-20, critical from 0-10), the logic changes: Warning seems to pick up on the bottom end (10-20 warns on 10 <= x < 20).
Entra en tu cuenta para publicar.
