Pandora FMS Community

I dont seem to understand how to get an snmp alert working

jdehnert · 10 may 2011, 3:55 · 3 mensajes · 53 visitas

  1. Inicio del debate

    I  have created an agent on a host I want to monitor, then I created a network server module using UCD MIBs and Manual setup.  I used snmpwalk, snmp v2c, to select IF-MIB::ifInOctets.2 to watch the traffic on an interface.  The IP address is correct.  I set an interval of 180, but I never get data returned from the system. In the system itself I do have snmp set up (which is why the snmpwalk works). What am I missing here?

  2. Greetings, Tip: Activate verbosity 10 in the Pandora server config file and check the Pandora log to receive complete information about any kind of problems. If your problem persists, please provide us with more detailed information about your problem and/or screenshots to help us identify the problem better.

  3. I had the same problem, and the issue was that the SNMP version was set wrong. Try different ones and see if that works (mine turned out to be 2c).

Entra en tu cuenta para publicar.