I was trying to configure an alarm that receives data from a WMI command. The module is not initialized and the error log I see this: NTSTATUS: NT_STATUS_NET_WRITE_FAULT - NT_STATUS_NET_WRITE_FAULT NTSTATUS: NT_STATUS_IO_TIMEOUT - NT_STATUS_IO_TIMEOUT NTSTATUS: NT_STATUS_IO_TIMEOUT - NT_STATUS_IO_TIMEOUT NTSTATUS: NT_STATUS_NET_WRITE_FAULT - NT_STATUS_NET_WRITE_FAULT
COMMAND WMI FAILED
senjor · 15 feb 2011, 15:24 · 8 mensajes · 61 visitas
- Inicio del debate
Helo senjor, It is not getting data from the wmi module. Try this from the server command line with wmic command to see if it works and report us. Cheers.
After running on the server with any queries wmic : ERROR : dcom_create_object ERROR : Login to remote object NT_STATUS: NT_STATUS_NET_WRITE_FAULT - NT_STATUS_NET_WRITE_FAULT
What Windows version are you running?
XP Professional Service Pack2
Are you running Windows firewall? It must be able to allow remote management or disable firewall service. Also, if user isn't admin user, then you will have to give serve DCOM execution permissions to this user, as it is explained here: (Link not available anymore) Regards.
I'm frustrated. There is no firewall. I am the administrator of the agent. The Windows Management Instrumentation service is running. Despite all this, I keep getting this error :(
It seems to be a problem with Windows authentication. I guess you have wmi server enabled in pandora_server.conf
# wmiserver : 1 or 0. Set to 1 to activate WMI server with this setup # DISABLED BY DEFAULT wmiserver 1Then have you check DCOM permissions? Regards.
Entra en tu cuenta para publicar.
