This is an old revision of the document!

Distributed monitoring with Satellite server

Satellite Server


Versión Enterprise.

The Satellite Server is used for network and remote system both monitoring and discovery. It can discover network elements (routers, switches, etc) using SNMP or ICMP, or MS Windows® servers (using WMI) and Linux® servers (using SNMP). This is no “ordinary” server, it can be considered to be an agent in broker mode with extended features. It is particularly useful to monitor inaccessible remote networks where a software agent is not even an option from Pandora FMS server.

The Satellite server can be used in Windows® and GNU/Linux® (recommended OS) alike, and it has some features that make it more special, highly recommended in certain environments.

  • It can execute network tests (ICMP, Latency and SNMP v1 and v2) at an extremely high pace (500 checks per second). For SNMP v3 configure the access credentials and due to data encryption the pace of the test will not be that fast.
  • It only sends information to the server every N seconds (300 seconds by default), but it can execute latency, ICMP and SNMP tests within a smaller interval (30 seconds for example). That way, it can warn Pandora FMS Server almost instantly when there is a status change. These status changes must have been previously defined if the module type is not *_proc (network interfaces or general network connectivity for instance).
  • It does not require connection to the database, rather it is autonomous. It sends all files in XML format the same way as an independent server, similar to a broker agent or an export server.
  • It has an auto-discovery system for SNMP and WMI. It creates detected agents (by IP address), it detects dynamic elements (network interfaces, storage) and monitors them automatically.
  • In Windows® systems, it can detect hard drives, CPUs, and memories.
  • In systems with SNMP, it can detect interface status, inbound and outbound traffic for each interface and the name of the system.
  • Auto-genarated modules can be modified, like every other module, managing the agent from the console as if it was an ordinary agent (in Mass operations menu > Satellite ).
  • Agents can be created manually by creating an agent configuration file in the Satellite server directory for agent configuration files (explained later on).


The maximum capacity of the Satellite server depends entirely on the server hardware where it runs and the type of checks you want to perform. In the test environment, 500 checks ICMP/SNMP per second have been made, but that depends a lot on the response times of remote devices (it is not the same a device which answers in 0.5ms than one that takes 2 seconds to answer back). Under ideal conditions, an amount of 150,000 checks could be monitored with a single Satellite server. In real conditions, it has been tested in controlled environments (LAN) made of about 50,000 modules with a single Satellite server in a low-end computer hardware (Intel i5, 2GZ, 4GB RAM).

If there are many critical modules, performance will be affected. Take into account the configured timeout, since there is only one check for each critical monitor for timeout. If there are 1000 critical modules and the timeout is configured to 4 seconds, it will take 4000 seconds to execute all the checks with only one thread.


The Satellite Server is distributed as tarball (GNU/Linux® or .exe (Windows®), so there is no need to install Perl nor any additional library. It works the same in Windows® or Linux® versions. In Windows® systems, it is installed as a service, and in Linux® systems, it is installed as a daemon. The configuration file and specifications in both cases are the same.

Satellite server Linux® version depends on external packages that are specified in the corresponding version of this documentation.

Satellite Server Installation in Linux Systems

The recommended GNU/Linux OS is CentOS. Once the binary that contains the Satellite server is downloaded, go to the download directory with root privileges and unzip the binary:

tar -xvzf pandorafms_satellite_server_X.XNG.XXX_x86_64.tar.gz

Then, a folder called satellite_server will be created. Go there typing:

cd satellite_server/

Before proceeding with the installation, these are the main dependencies of the Satellite server: Perl, Braa, Wmic, Fping and Nmap.

Install perl with the following command:

yum install perl.}}

In the installer, Braa and Wmic dependencies are included. Fping and Nmap must be installed independently:

yum install fping nmap

To install the Satellite Server, execute the installing command:

./satellite_server_installer --install

Once finished, edit the satellite_server.conf file located at:


The default text editor in CentOS is VIM. Look for the token pandora_license, proceed to uncomment it and enter Pandora FMS Enterprise license. After that, save the file and activate the service, executing the following:

sudo /etc/init.d/satellite_serverd start

In case of failure, take a look at the log file at:


Windows Installation

Choose the installation language:

Click Next:

Choose where to install the program:

WinPCap installation is required. The installation window will appear at this step of the installation process:

Configure WinPCap to start when the system starts.

Once WinPCap installation is finished, this window will appear:

Enter Pandora FMS license number to continue the installation:

Then, set Pandora FMS server address to send data. Define the network recon rules for Satellite server:

Restart the machine so that all changes are applied.

Once ther process is finished, start and stop the Pandora FMS Satellite server from the Windows® Start menu.

WMI module operation in some Windows versions

For Windows® security reasons, some versions have limited users who can carry out remote WMI queries. If these queries were not carried out, the solution would be to run the Satellite server service as an Administrator user.

The process to follow is:

Open the services:

Right click on the service and go to Properties:

On the Log In window, select an account with Administrator permissions and apply changes:

Finally, restart the service to apply the changes.


All parameters that require a timeout or some time are specified in seconds, (for example 300 = 5 minutes).

It is important to keep in mind that the latency and snmp intervals are specific for the status change. In case of Boolean checks (port or machine status) the threshold that defines the status change is automatic. For numerical values (latency, network traffic in an interface, disk space, CPU, etc), it is based on a threshold that must be defined in each module.

agent_interval xxx

agent_interval xxx

300 seconds by default (5 minutes). After that time, information is sent to the server. Regardless of checks done by the network server having a lower interval. If necessary and by default, it creates agents in the corresponding Pandora FMS server according to the specified time.

agent_theads xxx

agent_threads xxx

Number of threads used for sending XML data files.


xxxxxx_interval xxx

It executes all checks (latency, snmp, etc) every xxx seconds. If the collected data is different compared to the previous one, it sends it right away. If it is the same, it will send it when the agent interval says so. It is useful to perform intesive checks and notify only in case of status change.


xxxxx_retries xxx

Number of xxx retries in checks (latency, snmp, ping…).


xxxxx_timeout xxx

Timeout in seconds for SNMP, Latency and Ping checks.


xxxxx_block xxx

It forces the server to execute checks into blocks of XXX checks. The higher the number (500 tops) the more capacity it will have, but at the expense of an increased latency. Sometimes, it might be recommended to lower that number (latency, ping and snmp).


xxxxx_threads n

Number of n assigned threads to every type of check. It depends on the capacity (CPY and RAM) of the machine. The higher the threads, the higher the load on the machine but the processing capacity will be higher. The performance may become poor when exceeding 20 threads, depending on each system.


log_file <path_file>

It indicates the file where the Satellite server log is written, by default the path is/var/log/satellite_server.log.

recon_task xxxxx ,yyyy

recon_task xxxxx[,yyyy]

IP networks and addresses for autodiscovery separated by commas, for example:,,


server_ip <IP>

IP address or DNS name of Pandora FMS Server where the information is sent. It is done using the Tentacle protocol, so communication with the system must be possible through Tentacle port 41121/tcp.


recon_mode <mode_discovery>

Autodiscovery mode (<mode_discovery>). The system will use the following protocols to discover systems:

  • icmp: It will just check whether the host is alive (ping) and measure latency time.
  • snmp: If it is capable of communicating by SNMP (only v1 and v2), it will look for all the interfaces and get its trafic from all of them, as well as its operative status and device name and location. It will try different communities provided in the configuration file to connect. To use SNMPv3 whose recognition is required, check this link on how to configure the known access credentials.
  • wmi: Similar to the previous case, but in this case showing CPU usage, memory and hard drives (all available ones).


recon_community <aaa>,<bbb>,<ccc>...

It states a list of SNMP <xxx> communities to be used in SNMP discovery, separated by commas. It will use this list in SNMP exploration: for each IP found, it will try to see whether it responds to any of these communities.


wmi_auth Administrator%password[,user%pass]

It specifies a list of user credential pairs, each of them in <username>%<password>format and separated by commas.

For example: admin%1234,super%qwerty.It will use this list for WMI exploration. For each IP found, it will try to see whether it responds to any of the combinations.


wmi_ntlmv2 [0|1]

It enables (1) or disables (0) authentication with protocol NTLMv2 for WMI.


agent_conf_dir <path>

Path ( <path>) to the directory automatically created and stored by the configuration files of each agent created by the Sattellite server. By default /etc/pandora/conf. Said agents can also be created manually.

group <grupo>

group <group_name>

It specifies the default group name <group_name> for agents created by the Satellite Server. For instance: “Servers”.


daemon [1|0]

When set to 1, it starts the daemon in the background (value by default).

hostfile <file>

It is an alternative/complementary method for network scanning. A file is provided with an adress in each line. It can include the hostname followed by the IP as well, so that the agent created bears that name and uses that IP for modules (e.g. hostname). It must be possible to send and fping to those addresses for them to be valid.

pandora_license xxxxxxx

pandora_license xxxxxxx

Type in store Pandora FMS Enterprise server license, as shown in the section SetupLicense from Pandora FMS console.

You may use the same license in as many Satellite Servers as you need, since the total of agents that use the license is verified in Pandora FMS server not the Satellite Server.


remote_config [1|0]

It enables remote configuration in detected agents by default. It is mandatory if you wish yo manage them from the console after detecting them. It also activates Satellite server remote configuration. To find out more, see Remote configuration.


temporal_min_size xxx

If the free space (in MB) in the partition where the temporary directory is located is smaller than this value, data packages are not generated anymore. It prevents the disk from becoming full if the connection with the server is lost during an extended interval for some reason.


xml_buffer [0|1]

The default value is 0. If set to 1, the agent will save any XML data files that could not be sent to retry it later on.

In a safe UNIX environment, consider changing the temporal directory, since /tmp gives writting permissions to all users.


snmp_version xx

SNMP version to use by default (only 1 and 2c are supported). 1 by default. To use SNMP v3 check this link on how to configure the known access credentials.

Some modules could stop working if you change this value.

braa <path to braa>

braa <path>

Path (<path>) to the braa binary. Value /usr/bin/braa by default.

fping <path to fping>

fping <path>

Path (<path>) to the Fping binary. Value by default /usr/sbin/fping.

fsnmp <path a fsnmp>

fsnmp <path>

Path (<path>) to the Fsnmp binary. Value by default /usr/bin/pandorafsnmp.

latency_packets xxx

latency_packets xxx

Number of xxx ICMP packages sent by latency request.

nmap <path to nmap>

nmap <path>

Path (<path>) to the Nmap binary. Value by default /usr/bin/nmap.

nmap_timing_template xxx

nmap_timing_template x

A value xxx that specifies the level of agressiveness of Nmap, from 1 to 5. 1 means slower but more reliable, 5 means faster but less reliable. Default value: 2.

ping_packets xxx

ping_packets xxx

Number of ICMP packages sent for each ping.

recon_enabled 0|1

recon_enabled [0|1]

It enables (1) or disables (0) equipment autodiscovery.

recon_timing_template xxx

recon_timing_template xxx

Like nmap_timing_template but applied to network scanning.

server_port xxxxx

server_port xxxxx

Tentacle server port.

server_name xxxxx

server_name xxxxx

Name of the Satellite server (by default it takes the machine's hostname).

server_path xxxxx

server_path <path>

Path <path> where XML files are copied if transfer_mode is in local (by default /var/spool/pandora/data_in).


Server parameters sent to Tentacle.

transfer_mode XXX

transfer_mode [tentacle|local]

File transfer mode. It can be Tentacle or local (by default Tentacle).

Secondary Server

secondary_mode [on_error|always]

An special kind of general configuration parameter is the definition of a secondary server. This allows defining a server to send data to, in a complementary way to the server defined the standard way. The secondary server mode works in two different ways:

  • on_error: It sends data to the secondary server only when it cannot send them to the primary one.
  • always: It always sends data to the secondary server, both if it can contact the main server or not.

Configuration example:

 secondary_server_path   /var/spool/pandora/data_in
 secondary_mode          on_error
 secondary_transfer_mode tentacle
 secondary_server_port   41121

snmp_verify 0|1

snmp_verify [0|1]

It enables (1) or disables (0) the verification of SNMPv1 modules that make braa fail in real time. These modules will be discarded and stop being executed. See both snmp2_verify and snmp3_verify.


snmp2_verify [0|1]

It enables (1) or disables (0) the verification of SNMPv2 module that make braa fail in real time. These modules will be discarded and stop being executed. See both snmp2_verify and snmp3_verify.

Verifying SNMP version 2 modules can take lots of time!


snmp3_verify [0|1]

It enables (1) or disables (0) the verification of SNMPv3 modules that make braa fail in real time. These modules will be discarded and stop being executed. See both snmp2_verify and snmp3_verify.


startup_delay xxx

It waits xxx seconds before sending XML data files for the first time.


temporal <directory>

Temporal directory where XML files are created, /tmp by default.


tentacle_client <path>

Full <path> to the Tentacle client (/usr/bin/tentacle_client by default).


wmi_client <path>

Full <path> to the wmic (/usr/bin/wmi by default).


snmp_blacklist <path>

Path (<path>) to the SNMP module blacklist file (/etc/pandora/satellite_server.blacklist by default).


add_host <dir_IP> [agent_name]

It adds the given host to the list of monitored agents. The name for the agent can be specified after the IP address. Multiple hosts may be added, one per line. For example:

 add host
 add host localhost.localdomain


ignore_host <agent_name>

It removes the given host from the list of monitored agents, even if it is found in a network scan by a recon task. The host must be identified by agent name. Multiple hosts may be ignored, one per line. For example:

 ignore host
 ignore host localhost.localdomain


keepalive xxx

Satellite Server reports its status and checks remote configuration changes (from agents and its own) every xxx seconds. It is 30 seconds by default.


credential_pass xxx

Password used to encrypt credential box passwords. It must match the one defined in Pandora FMS console. The hostname is used by default.

timeout_bin <path to timeout>

timeout_bin <path>

If defined, the timeout program (usually /usr/bin/timeout) will be used to call the Tentacle client.


timeout_seconds xxx

Timeout in seconds for the timeout command. The timeout_bin parameter must be configured.


proxy_traps_to <dir_IP[:port]>

It redirects SNMP traps received by the Satellite server to the given address (and port). Port 162 is used by default.


proxy_tentacle_from <dir_IP[:port]>

It redirects data received by Tentacle server from the specified address and port. Port 41121 is used by default.


proxy_tentacle_to <dir_IP[:port]>

It redirects Tentacle client requests received by the Satellite Server to the given address (and port). Port 41121 is used by default.

This option may be in conflict with remote agent configuration.

This happens if the Satellite server is intended to be used as proxy for some software agents and monitor them remotely from the Satellite server itself (ICMP, SNMP, etc.) and remote configuration is enabled in both cases.

In this situation, it is necessary to either use different agents for the performed checks (i.e. with different agent_name), or leave the remote configuration enabled only on one of them (Satellite Server or software agents).


dynamic_inc [0|1]

When set to 1, it moves dynamic auto-discovered modules (SNMP, WMI…) to separate files so that they do not interfere with remote agent configuration.


vlan_cache_enabled [0|1]

It enables (1) or disables (0) the VLAN cache in the auto-discovered hosts.


verbosity <0-10>

Detail log level, where 10 is the highest information detail level.


Version NG 713 or superior.


ICMP check blacklist. This field can be configured with a list of IPs, using CIDR notation to prevent ICMP-type modules from running. To specify multiple subnets, separating them with commas.


Version NG 713 or superior.

agents_blacklist_snmp[,] (Version> 7.0OUM713)

SNMP check blacklist. This field can be configured with a list of IPs, using CIDR notation to prevent SNMP-type modules from running. You may specify multiple subnets separating them with commas.


Version NG 713 or superior.


WMI Check blacklist. This field can be configured with a list of IPs, using the CIDR notation to prevent WMI-type modules from running. You may specify multiple subnets by separating them with commas.


Versión NG 734 o superior.

general_gis_exec xxx

By enabling this option, a GIS positioning script will be used for all agents detected by the Satellite server. The script must have running permissions and must print on screen the coordinates with the format <longitude>,<latitude>,[<altitude>]. The third parameter, altitude, is optional.

Agent creation in Satellite Server

There are three ways of creating an agent in the Satellite server: Recon Task, Satellite_hosts.txt file, or manually creating the .conf of the agents to monitor.

Agent creation through Recon Task

The creation of agents through Recon Task is the most used by Pandora FMS users. To be able to do it, go to the Satellite server configuration file and set the following parameters:

  • recon_community: Specify a list of SNMP communities to use in SNMP discovery separated by commas (in case of performing a recon of the SNMP type).
  • recon_enabled: It must be set to 1 to enable the recon task of the Satellite server.
  • recon_interval: Time interval where a certain network is scanned, in seconds (604800 seconds by default, 7 days).
  • recon_mode:Recon task mode (snmp,icmp,wmi) separated by commas.
  • recon_task: List of networks to be recognized, separated by commas.
  • recon_timing_template: A value that specifies how aggressive nmap must be, from 1 to 5. 1 means slower but more reliable, 5 means faster but less reliable (3 by default).

An example of Recon Task would be:

 recon_community public
 recon_enabled 1
 recon_interval 604800
 recon_mode icmp,snmp,wmi
 recon_timing_template 3

Once the data has been configured, run the satellite server using the command:

/etc/init.d/satellite_serverd start

Agents without modules in their configuration files will be ignored by the Satellite Server.

Agent creation through Satellite_hosts.txt

First, in order to create an agent through the satellite_hosts.txt file, go to the configuration file of the Satellite server and uncomment the line:

host_file /etc/pandora/satellite_hosts.txt

Secondly, create the file satellite_hosts.txt with the IP of the host that you wish to create by entering IP and name of the agent to create: Server.5 Server.6 Server.7

In order for these IPs to be created, it is necessary to be able to make the fping call to each one of the IPs in the list, otherwise it will not be created.

Once the data has been configured, run the satellite server using the command:

/etc/init.d/satellite_serverd start

The reading of the indicated file is done every recon_interval seconds.

Manual Agent Creation

Firstly, look at the configuration file of the Satellite server in the /etc/pandora/conf directory, which is where the new agent configuration files are created. Open a terminal and go to that folder:

cd /etc/pandora/conf

Once this path is located, create a .conf for example “archivo.conf”. Fill in the following fields:

  • agent_name: Agent name.
  • agent_alias: Agent alias.
  • address: IP of the element to monitor.
  • group: Group to assign the agent to.
  • gis_exec: Positioning script (optional). It overwrites the general_gis_exec location of the Satellite server.
  • Modules to be monitored by the agent.

An example would be:

agent_name Example1
agent_alias It is an example
address X.X.X.X
group Servers
module_name Ping
module_name Latency

Once the data has been configured, run the Satellite server using the command:

/etc/init.d/satellite_serverd start

Agent removal in Satellite Server

You may fully remove the agents or delete them partially.

First back up the folders and their files before proceeding.

For agent total removal, take into account the method used in agent creation.

  • Manual: First remove the.conf files from the agents created in the/etc/pandora/conf folder and then remove the agents from the console.
  • Satellite_hosts.txt file: Delete the file as well as the.conf that have been created in the folder /etc/pandora/conf and later delete the agents from the console.
  • Recon_task: Deconfigure therecon_task from the .conf file of the Satellite server, then remove the .conf created in the folder /etc/pandora/conf and then remove the agents from the console.

For agent partial removal also take into account the method used in the agent creation.

  • Manual: First of all, remove the .conf files from the agents you wish to delete in the /etc/pandora/conf folder and then remove the agents from the console.
  • Satellite_hosts.txt file: Delete the lines of the IPs from the file as well as the .conf that have been created in the folder /etc/pandora/conf with those IPs and then delete the agents from the console.
  • Recon_task: Configure the blacklist of the recon_task in the conf file of the Satellite server, then remove the .conf created in the folder /etc/pandora/conf with those IPs and then remove the agents from the console.

Custom settings (by agent)

In addition to “automatic” modules, all kinds of available TCP, SNMP or WMI tests can be added, using a similar syntax to the local modules in software agents. Here are some module examples valid for Satellite server, just as they are autogenerated after being detected by the system.

Make sure OIDs start with a dot, otherwise SNMP modules will not work!

Interface status through SNMP. The Satellite server detects automatically each interface.

 module_name if eth1 OperStatus
 module_description IP address N/A. Description: The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed.
 module_type generic_data_string
 module_oid .
 module_community artica06

To force the module to use SNMP version 2c, add the line:

module_version 2c

To force the module to use SNMP version 1, add the line:

module_version 1

For example:

 module_name if eth1 OperStatus
 module_description IP address N/A. Description: The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed.
 module_type generic_data_string
 module_version 2c
 module_oid .
 module_community artica06

Conectivity to a machine (using PING)

 module_name ping
 module_type generic_data

Port check (using TCP)

 module_name Port 80
 module_type generic_proc
 module_port 80

General SNMP check. In this case, the server retrieves automatically the traffic from each interface with its“real” descriptive name.

 module_name if eth0 OutOctets
 module_description The total number of octets transmitted out of the interface, including framing characters.
 module_type generic_data_inc
 module_oid .
 module_community artica06

CPU WMI usage check (percentage).

 module_name CPU
 module_type generic_data
 module_wmiauth admin%none

Memory free WMI check (percentage).

 module_name FreeMemory
 module_type generic_data
 module_wmiauth admin%none

General WMI Query

 module_name GenericWMI
 module_type generic_data_string
 module_wmiquery SELECT Name FROM Win32_ComputerSystem
 module_wmiauth admin%none

Generic SSH command:

 module_name GenericSSH
 module_type generic_data
 module_command ls /tmp | wc -l

To add a threshold, do it both in the module's text definition and threshold definition in the web interface (module_min_warning, module_min_critical). For example:

 module_name latency
 module_type generic_data
 module_min_warning 80
 module_min_critical 120

Execution modules can be created manually. The scripts or commands executed by the Satellite server must be previously established and available for the server to use. It works the same as an agent module_exec. Bear in mid that the use of module_exec can make the performance of the Satellite server to become poor.

 module_name Sample_Remote_Exec
 module_type generic_data
 module_exec /usr/share/test/
 module_min_warning 90
 module_min_critical 95

From Pandora FMS version 7 on, plugins can be added. Like those, note that the plugins will run on the machine where the Satellite server is running. Therefore, it will be necessary to implement in these plugins some method to connect to the remote computer you wish to monitor. The advantage over the previous ones is their great flexibility. That way, preconditions and other mechanisms for which a module_exec falls short can be implemented. The syntax is the same as that of the agents. An example of using a plugin might be as follows:

module_plugin /usr/share/pandora/


To configure an SNMPv3 module, set module_version to 3 and specify

module_seclevel: Security level ( noauth, authnopriv or authpriv ).

module_secname: Security name.

module_authproto: Authentication protocol ( md5 or sha ).

module_authpass: Authentication password.

module_privproto: Security protocol ( aes or des ).

module_privpass: Privacy password, if needed. For example:

 module_name snmp_authnopriv
 module_type generic_data_string
 module_version 3
 module_oid .
 module_seclevel authnopriv
 module_secname snmpuser
 module_authproto md5
 module_authpass 12345678
 module_name snmp_authpriv
 module_type generic_data_string
 module_version 3
 module_oid .
 module_seclevel authpriv
 module_secname snmpuser
 module_authproto sha
 module_authpass 12345678
 module_privproto aes
 module_privpass 12345678

SNMPv3 specific configuration can be shared between modules by placing it outside the module declaration, in case it is the same for all of them (it can also be shared between agents by moving it to the Satellite's configuration file):

agent_name snmp

seclevel authpriv
secname snmpuser
authproto md5
authpass 12345678
privproto des
privpass 12345678

module_name snmp_authpriv_1
module_type generic_data_string
module_version 3
module_oid .

module_name snmp_authpriv_2
module_type generic_data_string
module_version 3
module_oid .

Credential boxes

Unless key-based authentication is configured with private and public keys, SSH modules require a username (<user>) and a password ( <pass> ) in order to work. These are configured in the main configuration file, satellite_server.conf, using credential boxes (credential_box ) with the following format:

 credential_box network/mask,username,password
 credential_box network/mask,username,[[encrypted password|]]

For example:


Credential boxes are searched from more restrictive to less restrictive masks.

Passwords can be encrypted using Blowfish in ECB mode. Make sure credential_pass is defined, otherwise the hostname will be used as the default encryption password. The hexadecimal representation of the ciphertext should be enclosed in double brackets:


General view of all agents in the console

If the configuration of the satellite server is correct, you should an aent view similar to this one:

Generally, in all machines ICMP (Ping and Latency) modules will be created, but in some machines SNMP and WMI modules can be created. In machines where WMI is enabled, the following modules will be generated if available:

In machines with SNMP enabled, the following modules will be generated if available:

In the massive operations menu of Pandora FMS console, there is a specific section for the Satellite server where different edition and deletion actions can be performed on agents and modules massively.

SNMP blacklist

When monitoring big networks, SNMP modules that return invalid data may affect the performance of the Satellite server and many modules may become Unknown. To avoid that, the Satellite Server can read a blacklist of SNMP modules that will be discarded at startup before execution.

To create a new blacklist, edit the /etc/pandora/satellite_server.conf configuration file and make sure snmp_blacklist is uncommented and configured with the path of the file where blacklist modules are saved. Then run:

satellite_server -v /etc/pandora/satellite_server.conf

Restart the Satellite server. The blacklist can be regenerated as many times as needed.

The format of the blacklist file is:


For example:

Go back to Pandora FMS documentation index