Configuration of the thresholds of a module

In this section you can configure the thresholds Warning and Critical for a module;module with the values that a module must have to be in a state CRITICALWARNING or NORMAL.

In this example you have a CPU module to add thresholds to. This module will always be in the NORMAL(green) state as long as it is between 0% and 100%. If you want this module to display in status Critical or Warning when the CPU reaches a certain percentage, you must configure by determining the desired Warning Status and Critical Status thresholds. In this example for when the CPU reaches 90% usage the module will switch to status Warning and if it exceeds 95%, switch to Critical.


After configuring the thresholds, just click on the Update button and the thresholds will be correctly configured. The next data received will already interpret these thresholds.

Revision #1
Created 24 October 2023 00:42:22 by Jimmy Olano
Updated 24 October 2023 00:50:51 by Jimmy Olano