# Plugin inventory Cisco configuration [In construction]

# Introduction

**Ver.** 17-09-2022

Inventory plug-in to show the configuration of a cisco device.

**Type:** Inventory plug-in

# Parameters

<table border="1" id="bkmrk-address-ip-o-host-de" style="border-collapse: collapse; width: 100%;"><tbody><tr><td style="width: 50%;">address</td><td style="width: 50%;">IP o host del switch</td></tr><tr><td style="width: 50%;">username</td><td style="width: 50%;">Usuario switch</td></tr><tr><td style="width: 50%;">sshpassword</td><td style="width: 50%;">Password ssh switch</td></tr><tr><td style="width: 50%;">enablepassword</td><td style="width: 50%;">Enable password switch</td></tr><tr><td style="width: 50%;">sleep</td><td style="width: 50%;">wait time commands</td></tr></tbody></table>

# Manual Execution

```
./get-config <ip> <user> <password> <enable pass>
```

[![image-1664369875885.png](https://pandorafms.com/guides/public/uploads/images/gallery/2022-09/scaled-1680-/image-1664369875885.png)](https://pandorafms.com/guides/public/uploads/images/gallery/2022-09/image-1664369875885.png)

\* si no se tiene configurado enable pass, introducir "" vacías en el último parámetro.

# Configuration in PandoraFMS

To configure the plugin you must access the inventory modules menu in the configuration section.

[![image-1666779669633.png](https://pandorafms.com/guides/public/uploads/images/gallery/2022-10/scaled-1680-/image-1666779669633.png)](https://pandorafms.com/guides/public/uploads/images/gallery/2022-10/image-1666779669633.png)

A new inventory plugin must be created, configured as follows.

[![image-1666780004334.png](https://pandorafms.com/guides/public/uploads/images/gallery/2022-10/scaled-1680-/image-1666780004334.png)](https://pandorafms.com/guides/public/uploads/images/gallery/2022-10/image-1666780004334.png)

In the box below you must add the path of the plugin.

Once created, access the inventory menu in the agent and select the inventory module created.

[![image-1666780366767.png](https://pandorafms.com/guides/public/uploads/images/gallery/2022-10/scaled-1680-/image-1666780366767.png)](https://pandorafms.com/guides/public/uploads/images/gallery/2022-10/image-1666780366767.png)

Once selected, the custom field option must be enabled and the parameters must be entered in order, if you do not have enable pass, you must enter quotation marks in the empty section.

[![image-1666780340477.png](https://pandorafms.com/guides/public/uploads/images/gallery/2022-10/scaled-1680-/image-1666780340477.png)](https://pandorafms.com/guides/public/uploads/images/gallery/2022-10/image-1666780340477.png)