Pandora: Documentation en: Netflow
- 1 NetFlow
The Pandora FMS versions 5 and above are designed to monitor the IP traffic by using the NetFlow protocol. This protocol allows to you review the traffic's most useful patterns and general data.
'NetFlow' is a network protocol, developed by Cisco Systems to collect IP traffic information. It has become an industrial standard for network traffic monitoring and is currently supported by several platforms besides Cisco's IOS and NXOS like Juniper devices, Enterasys Switches and operating systems like Linux, FreeBSD, NetBSD and OpenBSD.
NetFlow-capable devices (NetFlow probes) are generating NetFlow records, which consist of small chunks of information which are sent to a central device or NetFlow Server (or NetFlow collector), which stores and processes that information.
Data is transmitted using the NetFlow protocol via UDP or SCTP protocols. A NetFlow record is a small packet which only contains statistical information about a connection, not the whole raw data or the payload.
There are several NetFlow implementations that may differ from the original specification and include additional information, but most of them provide at least the following:
- The source's IP address.
- The target's IP address.
- The source's UDP or TCP port.
- The target's UDP or TCP port.
- The IP protocol.
- An interface (SNMP ifIndex)
- The type of service.
With time, some manufacturers have designed similar protocols with different names but for the same purpose:
- 'Jflow' or 'cflowd' from Juniper Networks
- 'NetStream' from 3Com/H3C/HP
- 'NetStream' from Huawei
- 'Cflowd' from Alcatel Lucent
- 'Rflow' from Ericsson
Pandora FMS also supports sFlow( Industry standard for packet export ), which allows to Pandora FMS to analyse sniffered packets at Layer 2 of the OSI model. Moreover, because sFlow is an standard, many vendors use it on their devices.
1.1.2 The NetFlow Collector
A NetFlow collector is a device (a PC or a Server), placed in a network to gather all the NetFlow information which is sent by routers and switches.
A NetFlow Server is required to receive and store that information. Pandora FMS uses 'nfcapd' for this purpose, and it's required to be installed before Pandora FMS is able to process any NetFlow-related data. Pandora FMS starts and stops this server automatically in the moment the need arises.
1.1.3 The NetFlow Probe
Probes are usually NetFlow-capable routers, configured to send NetFlow data to its collector - in our case, a Pandora FMS server with 'nfcapd' running.
1.2 Installation and Requirements
Pandora FMS uses an open-source tool called 'nfcapd' to process all NetFlow traffic. This daemon is automatically started by the Pandora FMS Server. This system stores the data in binary files at a specific location. You're required to install 'nfcapd' on your system before working with NetFlow. 'nfcapd' listens on port 9995 UDP by default. Please keep in mind to open port 9995 UDP in case you have firewalls in place.
1.2.1 Installation of 'nfcapd'
You're required to install 'nfcapd' manually, because Pandora FMS is not going to install it by default. For more information on how to install it, please visit the
Official NFCAPD Project Page.
Pandora FMS uses the directory '/var/spool/pandora/data_in/netflow' by default to store all NetFlow data. The 'nfcapd' daemon is going to point to this directory when it's getting started by the Pandora FMS Server. Do not change it unless you know exactly what you're doing.
Pandora FMS requires the nfdump version 1.6.8p1 in order to process any NetFlow data properly.
In order to test your 'nfcapd' installation manually, please execute the command below.
nfcapd -l /var/spool/pandora/data_in/netflow -D
Please keep in mind that the Pandora FMS Console (and more specifically the web server which hosts it) requires access to the directory of '/var/spool/pandora/data_in/netflow' in order to read any NetFlow-related data files.
1.2.2 The NetFlow Probe Installation
If a NetFlow capable router is not available, but you use a Linux server to route your traffic, you may install a NetFlow software probe which sends all NetFlow-related information to its server.
In Linux there is a program called 'fprobe' which obtains the traffic and sends it to a NetFlow Server. By this program you're able to generate NetFlow traffic which goes through its interfaces, e.g.:
/usr/sbin/fprobe -ieth0 -fip 192.168.70.185:9995
Once the traffic has been generated, you're able to review the traffic's statistics by entering the following command:
nfdump -R /home/netflow_data/
The above mentioned command displays information similar to the one shown below.
Aggregated flows 1286 Top 10 flows ordered by packets: Date flow start Duration Proto Src IP Addr:Port Dst IP Addr:Port Packets Bytes Flows 2011-12-22 20:41:35.697 901.035 TCP 192.168.60.181:50935 -> 192.168.50.2:22 2105 167388 4 2011-12-22 20:41:35.702 900.874 TCP 192.168.50.2:22 -> 192.168.60.181:50935 1275 202984 4 2011-12-22 20:48:15.057 1.347 TCP 126.96.36.199:80 -> 192.168.50.15:40044 496 737160 1 2011-12-22 20:48:14.742 1.790 TCP 188.8.131.52:80 -> 192.168.50.15:60101 409 607356 1 2011-12-22 20:46:02.791 76.616 TCP 192.168.50.15:80 -> 192.168.60.181:40500 370 477945 1 2011-12-22 20:48:15.015 1.389 TCP 192.168.50.15:40044 -> 184.108.40.206:80 363 22496 1 2011-12-22 20:46:02.791 76.616 TCP 192.168.60.181:40500 -> 192.168.50.15:80 303 24309 1 2011-12-22 20:48:14.689 1.843 TCP 192.168.50.15:60101 -> 220.127.116.11:80 255 13083 1 2011-12-22 20:48:14.665 1.249 TCP 18.104.22.168:80 -> 192.168.50.15:38476 227 335812 1 2011-12-22 20:48:21.350 0.713 TCP 22.214.171.124:80 -> 192.168.50.15:47551 224 330191 1 Top 10 flows ordered by bytes: Date flow start Duration Proto Src IP Addr:Port Dst IP Addr:Port Packets Bytes Flows 2011-12-22 20:48:15.057 1.347 TCP 126.96.36.199:80 -> 192.168.50.15:40044 496 737160 1 2011-12-22 20:48:14.742 1.790 TCP 188.8.131.52:80 -> 192.168.50.15:60101 409 607356 1 2011-12-22 20:46:02.791 76.616 TCP 192.168.50.15:80 -> 192.168.60.181:40500 370 477945 1 2011-12-22 20:48:14.665 1.249 TCP 184.108.40.206:80 -> 192.168.50.15:38476 227 335812 1 2011-12-22 20:48:21.350 0.713 TCP 220.127.116.11:80 -> 192.168.50.15:47551 224 330191 1 2011-12-22 20:48:15.313 1.603 TCP 18.104.22.168:80 -> 192.168.50.15:52019 212 313432 1 2011-12-22 20:48:14.996 1.433 TCP 22.214.171.124:80 -> 192.168.50.15:36940 191 281104 1 2011-12-22 20:51:12.325 46.928 TCP 192.168.50.15:80 -> 192.168.60.181:40512 201 245118 1 2011-12-22 20:52:05.935 34.781 TCP 192.168.50.15:80 -> 192.168.60.181:40524 167 211608 1 2011-12-22 20:41:35.702 900.874 TCP 192.168.50.2:22 -> 192.168.60.181:50935 1275 202984 4 Summary: total flows: 1458, total bytes: 5.9 M, total packets: 15421, avg bps: 49574, avg pps: 15, avg bpp: 399 Time window: 2011-12-22 20:40:46 - 2011-12-22 20:57:21 Total flows processed: 1458, Records skipped: 0, Bytes read: 75864 Sys: 0.006s flows/second: 208345.2 Wall: 0.006s flows/second: 221177.2
If your system works properly, the following chapter is intended to configure Pandora FMS in order to use this particular configuration appropriately.
1.3 Working with NetFlow under Pandora FMS
Pandora FMS doesn't store NetFlow data in its database. The information is processed on demand in order to render reports.
Pandora FMS works with NetFlow data by using filters, which are sets of rules that match certain traffic patterns. A rule can be as simple as 'all the traffic from the 192.168.70.0/24 subnet' or a complex 'pcap' filter expression.
Once the filters are created, we're required to define reports that determine how the information matched by those filters is going to be displayed (e.g. charts and tables) and the time frame. The NetFlow reports can be accessed on demand like any other Pandora FMS reports.
There is also a live NetFlow Viewer to analyze the traffic, modify and create rules on the spot. It can be very useful to investigate problems or temporarily display a chart that we don't intend to save for a later usage.
First of all, you're required to authorize NetFlow in order to become accessible from the 'Operation' and 'Administration' menus.
You can find the NetFlow option in the 'Configuration' chapter of the 'Administration' menu in which we specify the path in which the files of the Netflow traffic are captured, e.g. '/tmp/netflow'. It's also very important to determine whether the path to the 'nfcapd' daemon is appropriately specified or not.
The configurable fields pertaining to this particular feature are the following:
Data Storage Path:
The directory in which the NetFlow data files are stored. IMPORTANT: The disk's access speed on which the NetFlow data is stored is usually the limiting performance factor.
The time interval in seconds for the data rotation. The recommended value is '3600'. A bigger interval means potentially bigger files, which means less I/O overhead, but it also renders accessing the data for a specific time interval slower.
Daemon Binary Path:
The path to the 'nfcapd' binary.
Nfdump Binary Path:
The path to the 'nfdump' binary.
Nfexpire Binary Path:
The path to the 'nfexpire' binary. This program was designed to delete old NetFlow data.
Maximum Chart Resolution:
The maximum number of points which a NetFlow Area Chart is going to display. The higher the resolution the lower the performance. Values between '50' and '100' are recommended here.
Disable Live View Custom Filters:
If enabled, only Netflow filters previously created by an administrator can be used in the Netflow live view.
Netflow max. Lifetime:
The NetFlow data which are older than the specified number of days are going to be deleted.
Once the NetFlow configuration is enabled, the Pandora FMS Server is required to be restarted in order to be able to start the 'nfcapd' server. This server must be properly installed and accessible from the system path. Please check the server logs if you're unsure on that. This server is not going to appear in the Pandora FMS server view mode, because it isn't considered a Pandora FMS Server.
You may access the creation and edition of filters by clicking on 'Administration' and 'NetFlow Filters'. This section contains a list of already created filters which can be of course altered or deleted.
The configurable NetFlow filters pertaining to this particular feature are the following:
- Name: It's recommended for the filter's name to be as descriptive and clear as necessary.
- Group: A user is only able to create a filter or edit the group's filters it has access to.
- Filter: There are two types of filters: Basic and advanced. Advanced filters allow the usage of advanced expressions in the same format as 'nfdump'. Basic filters can filter traffic by source and destination IP and source or destination port. Lists of comma-separated IPs or ports are also accepted here.
- Aggregate by: All traffic data can be grouped by one of the following fields:
IP Origin: It displays the traffic of different origin for each IP.
IP Destination: It displays the traffic of different destinations for each IP.
Origin Port: It displays the traffic for each port of different origins.
Destiny Port: It displays the traffic for different destinations for each port.
Protocol: It displays the traffic for each protocol.
Any: The total data is going to be displayed by this one.
Output Format: The data is going to be displayed in the selected unit:
Kilobytes per second.
Megabytes per second.
Basic web traffic filter example:
Advanced intranet traffic filter example:
Here are other examples of advanced filters:
- Capture traffic to or from 192.168.0.1:
- Capture traffic to 192.168.0.1:
dst host 192.168.0.1
- Capture traffic from 192.168.0.0/24:
src net 192.168.0.0/24
- Capture HTTP and HTTPS traffic:
(port 80) or (port 443)
- Capture all traffic except DNS:
port not 53
- Capture SSH traffic to 192.168.0.1:
(port 22) and (dst host 192.168.0.1)
Netflow reports are integrated with Pandora FMS reports (see Reports for more information).
To create a report item, choose one of the available netflow report items.
And configure it. The following options are available:
- Type: Item types will be explained below.
- Filter: Netflow filter to use.
- Description: Item description.
- Period: Length of the interval of data to display.
- Resolution: Data will be retrieved in blocks of size equal to the resolution. If Period / Resolution is bigger than the configure maximum chart resolution the resolution will be dynamically readjusted. For example, for a period of 1 day and a resolution of 1 hour 24 points will be drawn in the chart.
- Max. values: Maximum number of elements for aggregates. For example, if a chart of HTTP traffic is drawn aggregated by source IP address and Max. values is set to 5, only 5 IP addresses will be shown.
There are five types of netflow report items:
- Area chart: An area chart, either aggregated or unaggregated.
- Pie chart: An aggregated pie chart.
- Data table: A text representation of the area chart.
- Statistics table: A text representation of the pie chart.
- Summary table: Traffic summary for the given period.
1.6 Netflow live view
Filters can be visualized live from "Operation / Netflow Live View". This tool allows you to preview changes made to a filter and save it when the desired result is achieved. It is also possible to load and modify already existing filters.
To modify an existing filter load if from the Load filter selector, make the desired changes and click on Update current filter.
To create a new filter, configure it, click on Save as new filter, enter a name and optionally select a group and click on Save as new filter again.