Information gathered at 20150319_114638 Linux chm-watchdog.cambridgehealth-care.com 2.6.32-504.8.1.el6.x86_64 #1 SMP Wed Jan 28 21:11:36 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux ========================================================================= ----------------------------------------------------------------- CPUINFO ----------------------------------------------------------------- processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Xeon(R) CPU X5355 @ 2.66GHz stepping : 7 microcode : 107 cpu MHz : 2666.664 cache size : 4096 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 4 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca lahf_lm dts tpr_shadow bogomips : 5319.89 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Xeon(R) CPU X5355 @ 2.66GHz stepping : 7 microcode : 107 cpu MHz : 2666.664 cache size : 4096 KB physical id : 1 siblings : 4 core id : 0 cpu cores : 4 apicid : 4 initial apicid : 4 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca lahf_lm dts tpr_shadow bogomips : 5320.05 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 2 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Xeon(R) CPU X5355 @ 2.66GHz stepping : 7 microcode : 107 cpu MHz : 2666.664 cache size : 4096 KB physical id : 0 siblings : 4 core id : 2 cpu cores : 4 apicid : 2 initial apicid : 2 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca lahf_lm dts tpr_shadow bogomips : 5319.89 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 3 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Xeon(R) CPU X5355 @ 2.66GHz stepping : 7 microcode : 107 cpu MHz : 2666.664 cache size : 4096 KB physical id : 1 siblings : 4 core id : 2 cpu cores : 4 apicid : 6 initial apicid : 6 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca lahf_lm dts tpr_shadow bogomips : 5320.05 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 4 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Xeon(R) CPU X5355 @ 2.66GHz stepping : 7 microcode : 107 cpu MHz : 2666.664 cache size : 4096 KB physical id : 0 siblings : 4 core id : 1 cpu cores : 4 apicid : 1 initial apicid : 1 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca lahf_lm dts tpr_shadow bogomips : 5319.89 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 5 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Xeon(R) CPU X5355 @ 2.66GHz stepping : 7 microcode : 107 cpu MHz : 2666.664 cache size : 4096 KB physical id : 1 siblings : 4 core id : 1 cpu cores : 4 apicid : 5 initial apicid : 5 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca lahf_lm dts tpr_shadow bogomips : 5320.05 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 6 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Xeon(R) CPU X5355 @ 2.66GHz stepping : 7 microcode : 107 cpu MHz : 2666.664 cache size : 4096 KB physical id : 0 siblings : 4 core id : 3 cpu cores : 4 apicid : 3 initial apicid : 3 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca lahf_lm dts tpr_shadow bogomips : 5319.89 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 7 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Xeon(R) CPU X5355 @ 2.66GHz stepping : 7 microcode : 107 cpu MHz : 2666.664 cache size : 4096 KB physical id : 1 siblings : 4 core id : 3 cpu cores : 4 apicid : 7 initial apicid : 7 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca lahf_lm dts tpr_shadow bogomips : 5320.05 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: ----------------------------------------------------------------- MEMINFO ----------------------------------------------------------------- MemTotal: 8054132 kB MemFree: 6688288 kB Buffers: 40000 kB Cached: 426360 kB SwapCached: 0 kB Active: 930980 kB Inactive: 238304 kB Active(anon): 703232 kB Inactive(anon): 2312 kB Active(file): 227748 kB Inactive(file): 235992 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 8191996 kB SwapFree: 8191996 kB Dirty: 92 kB Writeback: 0 kB AnonPages: 702980 kB Mapped: 51628 kB Shmem: 2572 kB Slab: 75776 kB SReclaimable: 38036 kB SUnreclaim: 37740 kB KernelStack: 3296 kB PageTables: 27052 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 12219060 kB Committed_AS: 1878788 kB VmallocTotal: 34359738367 kB VmallocUsed: 296652 kB VmallocChunk: 34359433880 kB HardwareCorrupted: 0 kB AnonHugePages: 266240 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 7488 kB DirectMap2M: 8376320 kB ----------------------------------------------------------------- Other System Parameters ----------------------------------------------------------------- Uptime: 11:46:38 up 23 min, 2 users, load average: 0.20, 0.55, 0.59 ----------------------------------------------------------------- PROC INFO (Pandora) ----------------------------------------------------------------- root 1859 0.0 0.0 145512 7368 ? SN 11:23 0:00 /usr/bin/perl /usr/bin/pandora_agent /etc/pandora pandora 2518 0.0 0.0 18604 956 ? Ss 11:23 0:00 /usr/bin/anytermd --port 8023 --user pandora -c telnet %p pandora 2520 0.0 0.0 18604 952 ? Ss 11:23 0:00 /usr/bin/anytermd --port 8022 --user pandora -c ssh %p pandora 2625 0.0 0.1 228168 9764 ? Ss 11:23 0:00 /usr/bin/perl /usr/bin/tentacle_server -a 0.0.0.0 -p 41121 -s /var/spool/pandora/data_in -i.*\.conf:conf;.*\.md5:md5;.*\.zip:collections -d root 3633 0.2 2.9 1487912 238564 ? Ssl 11:38 0:01 /usr/bin/perl /usr/bin/pandora_server /etc/pandora/pandora_server.conf -D root 4411 0.0 0.0 106100 1216 pts/0 S+ 11:46 0:00 /bin/bash /usr/share/pandora_server/util/pandora_diagnostic.sh root 4419 0.0 0.0 103256 856 pts/0 S+ 11:46 0:00 grep pandora ----------------------------------------------------------------- MySQL Configuration file ----------------------------------------------------------------- ----------------------------------------------------------------- Pandora FMS Server Configuration file ----------------------------------------------------------------- ############################################################################# # Pandora FMS Server Parameters # Pandora FMS, the Flexible Monitoring System. # Version 5.1SP2 # Licensed under GPL license v2, # (c) 2003-2014 Artica Soluciones Tecnologicas # http://www.pandorafms.com # Please change it for your setup needs ############################################################################# # Servername: Name of this server # if not given, it takes hostname. It's preferable to setup one # because machine name could change by some reason. servername chm-watchdog # incomingdir: Defines directory where incoming data packets are stored # You could set directory relative to base path or absolute, starting with / incomingdir /var/spool/pandora/data_in # log_file: Main logfile for pandora_server # You could set file relative to base path or absolute, starting with / log_file /var/log/pandora/pandora_server.log # Log file for Pandora FMS SNMP console. Its generated by NetSNMP Trap daemon snmp_logfile /var/log/pandora/pandora_snmptrap.log # Error logfile: aux logfile for pandora_server errors (in Daemon mode) # You could set file relative to base path or absolute, starting with / errorlog_file /var/log/pandora/pandora_server.error # daemon: Runs in daemon mode (background) if 1, if 0 runs in foreground # this could be also configured on commandline with -D option # daemon 1 # dbengine: mysql, postgresql or oracle (mysql by default) dbengine mysql # Database credentials. A VERY important configuration. # This must be the same credentials used by your Pandora FMS Console # but could be different if your console is not running in the same # host than the server. Check your console setup in /include/config.php # dbname: Database name (pandora by default) dbname pandora # dbuser: Database user name (pandora by default) dbuser pandora # dbhost: Database hostname or IP address dbhost 127.0.0.1 # dbport: Database port number # Default value depends on the dbengine (mysql: 3306, postgresql: 5432, oracle: 1521) #dbport 3306 # By default, parent agent will not be updated #update_parent 0 # verbosity: level of detail on errors/messages (0 default, 1 verbose, 2 debug.... 10 noisy) # -v in command line (verbose) or -d (debug). Set this to 10 when try to locate problems and # set to 1 or 3 on production enviroments. verbosity 3 # Master Server, 1 if master server (normal mode), 0 for slave mode (slave in multi-server setup) master 1 # Activate Pandora SNMP console (depending on snmptrapd) snmpconsole 0 # snmpconsole_threads: number of SNMP console threads for processing SNMP traps. snmpconsole_threads 1 # Attempt to translate variable bindings when processing SNMP traps. 1 enabled, 0 disabled. 0 by default. (ENTERPRISE ONLY). translate_variable_bindings 0 # Attempt to translate enterprise strings when processing SNMP traps. 1 enabled, 0 disabled. 1 by default. (ENTERPRISE ONLY). translate_enterprise_strings 0 # snmptrapd will ignore authenticationFailure traps if set to 1. snmp_ignore_authfailure 1 # snmptrapd will read the PDU source address instead of the agent-addr field is set to 1. snmp_pdu_address 0 # Activate (1) Pandora Network Server networkserver 1 # Activate (1) Pandora Data Server dataserver 1 # Activate (1) Pandora FMS Recon server reconserver 1 # pluginserver : 1 or 0. Set to 1 to activate plugin server with this setup pluginserver 1 # Pandora FMS Plugin exec tool filepath (by default at /usr/bin) plugin_exec /usr/bin/timeout # predictionserver : 1 or 0. Set to 1 to activate prediction server with this setup # DISABLED BY DEFAULT predictionserver 0 # wmiserver : 1 or 0. Set to 1 to activate WMI server with this setup # DISABLED BY DEFAULT wmiserver 1 # Network timeout (in seconds) for timeout in network connections for Network agents network_timeout 4 # Server keepalive (in seconds) server_keepalive 45 # Server Threshold: defines number of seconds of main loop (in sec) server_threshold 5 # Network threads: Do not set too high (~40). Each threads make a network module check. network_threads 4 # icmp_checks x : defines number of pings for each icmp_proc module type. at least one of # that ping should be 1 to report 1. Setting this to 1 will make all icmp montioring faster but # with more probability of failure. icmp_checks 3 # tcp specific options : # tcp_checks: number of tcp retries if first attempt fails. # tcp_timeout: specific timeout for tcp connections tcp_checks 1 tcp_timeout 10 # snmp specific options : # snmp_checks: number of snmp request retries if first attempt fails. # snmp_timeout: specific timeout for snmp request. snmp_checks 1 snmp_timeout 4 # snmp_proc_deadresponse 1 (default): Return DOWN if cannot contact # or receive NULL from a SNMP PROC module. snmp_proc_deadresponse 1 # plugin_threads: Specify number of plugin server threads for processing plugin calls plugin_threads 1 # plugin_timeout: Specify number of seconds calling plugin exec waiting for response # after this time, call is aborted and result is "unknown". plugin_timeout 12 # wmi_timeout : specific timeout for wmi request. wmi_timeout 7 # wmi_threads: Specify number of WMI server threads for processing WMI remote calls wmi_threads 1 # recon_threads. Each thread will scan a different scantask. recon_threads 1 # dataserver_threads: Number of threads for data server (XML processing threads) dataserver_threads 1 # mta_address: External Mailer (MTA) IP Address to be used by Pandora FMS internal email capabilities mta_address localhost # mta_port, this is the mail server port (default 25) #mta_port 25 # mta_user MTA User (if needed for auth, FQD or simple user, depending on your server) #mta_user myuser@mydomain.com # mta_auth MTA Auth system (if needed, it supports LOGIN, PLAIN, CRAM-MD5, DIGEST-MD) #mta_auth LOGIN # mta_from Email address that sends the mail, by default is pandora@localhost # probably you need to change it to avoid problems with your antispam mta_from Pandora FMS # Set 1 if want eMail deliver alert in separate mail (default). # Set 0 if want eMail deliver shared mail by all destination. mail_in_separate 1 # xprobe2: Optional package to detect OS types using advanced TCP/IP # fingerprinting tecniques, much more accurates than stadard nmap. # If not provided, nmap is used insted xprobe2 xprobe2 /usr/bin/xprobe2 # nmap: If provided, is used to detect OS type with recon server using # advanded OS fingerprint technique. Xprobe2 gives more accurate results # Nmap is also used to do TCP port scanning in detected host. nmap /usr/bin/nmap # Default path is /usr/sbin/fping for installation default in distro Centos , if you are installing in other distribution, # you install fping in /usr/bin/fping and change the path in this line. # Path to the fping binary. Used by the Enterprise ICMP Server. fping /usr/sbin/fping # fping /usr/bin/fping # A value that specifies how aggressive nmap should be from 1 to 5. 1 means slower but more reliable, 5 means faster but less reliable. 2 by default. nmap_timing_template 2 # Like nmap_timing_template, but applies to Satellite Server and Recon Server network scans. 3 by default. recon_timing_template 3 # snmpget: Needed to do SNMP checks. By default is on /usr/bin/snmpget snmpget /usr/bin/snmpget # Location of the braa binary needed by the Enterprise SNMP Server # /usr/bin/braa by default (PANDORA FMS ENTERPRISE ONLY). braa /usr/bin/braa # Number of retries before braa hands a module over to the Network Server (PANDORA FMS ENTERPRISE ONLY). braa_retries 3 # Default group id for new agents created with Pandora FMS Data Server # If this token is enabled and Agent is setup with a fixed group, server settings will override agent settings # If this token is disabled and group is not provided in the agent, or provided group doesn't exist, agent data # will be dropped. We use the Group ID #10 (Unknown) for a "valid" default value, please change as your own decision. autocreate_group 10 # Set to 1 if want to autocreate agents with Pandora FMS Data Server, # set to 0 to disable (for security purposes, for example). autocreate 1 # max_log_size: Specify max size of Pandora FMS server log file (1MB by default). If # log file grows above this limit, is renamed to "pandora_server.log.0". max_log_size 1048576 # max_log_generation: Specify max generation count (between 1 and 9) of Pandora FMS server log files. max_log_generation 1 # max_queue_files (500 by default) # When server have more than max_queue_files in incoming directory, skips the read # the directory to avoid filesystem overhead. max_queue_files 500 # Use the XML file last modification time as timestamp. use_xml_timestamp 1 # Pandora FMS will autorestart itself each XXX seconds, use this if you experience problems with # shutting down threads, or other stability problems. # auto_restart 86400 # Pandora FMS will restart after restart_delay seconds on critical errors. restart 1 restart_delay 60 # More information about GIS Setup in /usr/share/pandora_server/util/gis.README # Flag to activate GIS (positional information for agents and maps) # by default it is desactivated #activate_gis 0 # Radius of error in meters to consider two gis locations as the same location. #location_error 50 # Recon reverse geolocation mode [disabled, sql, file] # disabled The recon task doesn't try to geolocate the ip discovered. # sql The recon task trys to query the SQL database to geolocate the # ip discovered # file The recon task trys to find the geolocation information of the # ip discovered in the file indicated in the # recon_reverse_geolocation_file parameter # recon_reverse_geolocation_mode disabled # Recon reverse geolocation file. This is the database with the reverse # geolocation information using MaxMind GPL GeoLiteCity.dat format). #recon_reverse_geolocation_file /usr/local/share/GeoIP/GeoIPCity.dat # Radius (in meters) of the circle in where the agents will be place randomly # when finded by a recon task. Center of the circle is guessed # by geolocating the IP. #recon_location_scatter_radius 1000 # Pandora Server self-monitoring (embedded agent) (by default enabled) self_monitoring 1 # Self monitoring interval (in seconds). self_monitoring_interval 300 # Update parent from the agent xml #update_parent 1 # # # This enable realtime reverse geocoding using Google Maps public api. # This requires internet access, and could have performance penalties processing GIS # information due the connetion needed to resolve all GIS input. # NOTE: If you dont pay the service to google, they will ban your IP in a few days. # google_maps_description 1 # This enable realtime reverse geocoding using Openstreet Maps public api. # This requires internet access, and could have performance penalties processing GIS # information due the connetion needed to resolve all GIS input. # You can alter the code to use a local (your own) openstreet maps server. # openstreetmaps_description 1 # Enable (1) or disable (0) Pandora FMS Event Web Server (PANDORA FMS ENTERPRISE ONLY). webserver 1 # Number of threads for the Web Server (PANDORA FMS ENTERPRISE ONLY). web_threads 1 # Uncomment to perform web checks with CURL instead of LWP. #web_engine curl # Enable (1) or disable (0) Pandora FMS Inventory Server (PANDORA FMS ENTERPRISE ONLY). inventoryserver 1 # Number of threads for the Web Server (PANDORA FMS ENTERPRISE ONLY). inventory_threads 1 # Enable (1) or disable (0) Pandora FMS Export Server (PANDORA FMS ENTERPRISE ONLY). exportserver 0 # Number of threads for the Export Server (PANDORA FMS ENTERPRISE ONLY). export_threads 1 # Enable (1) or disable (0) Pandora FMS Event Server (PANDORA FMS ENTERPRISE ONLY). eventserver 0 # Event Server event window in seconds (3600 by default) (PANDORA FMS ENTERPRISE ONLY). event_window 3600 # Enable (1) or disable (0) Pandora FMS Enterprise ICMP Server (PANDORA FMS ENTERPRISE ONLY). # You need nmap 5.20 or higher in order to use this ! icmpserver 1 # Number of threads for the Enterprise ICMP Server (PANDORA FMS ENTERPRISE ONLY). icmp_threads 1 # Enable (1) or disable (0) Pandora FMS Enterprise SNMP Server (PANDORA FMS ENTERPRISE ONLY). # Check braa tool is running and operative. snmpserver 1 # Number of threads for the Enterprise SNMP Server (PANDORA FMS ENTERPRISE ONLY). snmp_threads 1 # Block size for block producer/consumer servers, that is, the number of modules # per block (15 by default) (PANDORA FMS ENTERPRISE ONLY). block_size 20 # If set to 1, process XML data files in a stack instead of a queue. 0 by default. # WARNING: Incremental modules will not work properly if dataserver_lifo is set to 1!!! dataserver_lifo 0 # If set to 1, the policy manager is enabled and the server is listening the policy queue. # 0 by default (PANDORA FMS ENTERPRISE ONLY) policy_manager 1 # If set to 1, the event replicate process is enabled. 0 by default. (PANDORA FMS ENTERPRISE ONLY) # WARNING: This process doesn't do anything if is not properly configured from the console setup event_replication 0 # If set to 1, new events validate older event for the same module. This will # affect the performance of the server. This was the "normal behaviour" on previous (4.x) versions. # disable only if you really know what you are doing !!. event_auto_validation 1 # If defined, events generated by Pandora FMS will be written to the specified text file. #event_file /var/log/pandora/pandora_events.txt # Set the maximum number of traps that will be processed from a single source in a # configured time interval. snmp_storm_protection 25 # Time interval for snmp_storm protection (in seconds). snmp_storm_timeout 10 # Default texts for some events. The macros _module_ and _data_ are supported. #text_going_down_normal Module '_module_' is going to NORMAL (_data_) #text_going_up_critical Module '_module_' is going to CRITICAL (_data_) #text_going_up_warning Module '_module_' is going to WARNING (_data_) #text_going_down_warning Module '_module_' is going to WARNING (_data_) #text_going_unknown Module '_module_' is going to UNKNOWN # Events older that the specified time (in seconds) will be auto-validated. Set to 0 to disable this feature. event_expiry_time 0 # Only events more recent than the specified time window (in seconds) will be auto-validated. This value must # be greater than event_expiry_time. #event_expiry_window 86400 # If set to 1, SNMP modules run by the Network Server will be claimed back by # the SNMP Enterprise Server when pandora_db is run. claim_back_snmp_modules 1 # If set to 1 asynchronous modules that do not receive data for twice their # interval will become normal. Set to 0 to disable. async_recovery 1 ----------------------------------------------------------------- Pandora FMS Logfiles information ----------------------------------------------------------------- total 232 drwxr-xr-x 2 pandora root 4096 Mar 16 12:11 . drwxr-xr-x 13 root root 4096 Mar 19 11:23 .. -rw-r--r-- 1 root root 1352 Mar 19 11:28 pandora_agent.log -rw-rw-rw- 1 root root 76022 Mar 19 11:38 pandora_server.error -rw-r--r-- 1 root root 135268 Mar 19 11:38 pandora_server.log ----------------------------------------------------------------- System disk ----------------------------------------------------------------- Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_chmwatchdog-lv_root 50G 2.6G 47G 6% / tmpfs 3.9G 80K 3.9G 1% /dev/shm /dev/sda1 477M 36M 416M 8% /boot /dev/mapper/vg_chmwatchdog-lv_home 276G 93M 262G 1% /home ----------------------------------------------------------------- Vmstat (5 execs) ----------------------------------------------------------------- procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu----- r b swpd free buff cache si so bi bo in cs us sy id wa st 0 0 0 6688256 40004 426356 0 0 25 40 33 45 0 0 99 0 0 0 0 0 6688156 40004 426380 0 0 0 0 176 75 0 0 100 0 0 0 0 0 6688420 40004 426388 0 0 0 0 176 323 0 0 100 0 0 0 0 0 6688296 40012 426380 0 0 0 52 74 99 0 0 100 0 0 0 0 0 6688296 40012 426380 0 0 0 104 188 254 0 0 100 0 0 ----------------------------------------------------------------- System dmesg ----------------------------------------------------------------- Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32-504.8.1.el6.x86_64 (mockbuild@c6b9.bsys.dev.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-11) (GCC) ) #1 SMP Wed Jan 28 21:11:36 UTC 2015 Command line: ro root=/dev/mapper/vg_chmwatchdog-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=vg_chmwatchdog/lv_root KEYBOARDTYPE=pc KEYTABLE=us rd_LVM_LV=vg_chmwatchdog/lv_swap rd_NO_DM rhgb quiet KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 0000000000100000 - 00000000cfb50000 (usable) BIOS-e820: 00000000cfb50000 - 00000000cfb66000 (reserved) BIOS-e820: 00000000cfb66000 - 00000000cfb85c00 (ACPI data) BIOS-e820: 00000000cfb85c00 - 00000000d0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000230000000 (usable) DMI 2.5 present. SMBIOS version 2.5 @ 0xFCDF0 DMI: Dell Inc. PowerEdge 2950/0DT021, BIOS 2.5.0 09/12/2008 e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0x230000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-D3FFF write-protect D4000-EBFFF uncachable EC000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 080000000 mask FC0000000 write-back 2 base 0C0000000 mask FF0000000 write-back 3 base 100000000 mask F00000000 write-back 4 base 200000000 mask FC0000000 write-back 5 base 0CFC00000 mask FFFC00000 uncachable 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 original variable MTRRs reg 0, base: 0GB, range: 2GB, type WB reg 1, base: 2GB, range: 1GB, type WB reg 2, base: 3GB, range: 256MB, type WB reg 3, base: 4GB, range: 4GB, type WB reg 4, base: 8GB, range: 1GB, type WB reg 5, base: 3324MB, range: 4MB, type UC total RAM covered: 8444M Found optimal setting for mtrr clean up gran_size: 64K chunk_size: 8M num_reg: 6 lose cover RAM: 0G New variable MTRRs reg 0, base: 0GB, range: 2GB, type WB reg 1, base: 2GB, range: 1GB, type WB reg 2, base: 3GB, range: 256MB, type WB reg 3, base: 3324MB, range: 4MB, type UC reg 4, base: 4GB, range: 4GB, type WB reg 5, base: 8GB, range: 1GB, type WB e820 update range: 00000000cfc00000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xcfb50 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000cfb50000 0000000000 - 00cfa00000 page 2M 00cfa00000 - 00cfb50000 page 4k kernel direct mapping tables up to cfb50000 @ 8000-e000 Use unified mapping for non-reserved e820 regions. init_memory_mapping: 0000000100000000-0000000230000000 0100000000 - 0230000000 page 2M kernel direct mapping tables up to 230000000 @ c000-12000 RAMDISK: 36e8e000 - 37fef716 ACPI: RSDP 00000000000f2160 00024 (v02 DELL ) ACPI: XSDT 00000000000f21fc 00084 (v01 DELL PE_SC3 00000001 DELL 00000001) ACPI: FACP 00000000cfb83524 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001) ACPI: DSDT 00000000cfb66000 04996 (v01 DELL PE_SC3 00000001 INTL 20050624) ACPI: FACS 00000000cfb85c00 00040 ACPI: APIC 00000000cfb83078 0009E (v01 DELL PE_SC3 00000001 DELL 00000001) ACPI: SPCR 00000000cfb83130 00050 (v01 DELL PE_SC3 00000001 DELL 00000001) ACPI: HPET 00000000cfb83184 00038 (v01 DELL PE_SC3 00000001 DELL 00000001) ACPI: MCFG 00000000cfb831c0 0003C (v01 DELL PE_SC3 00000001 DELL 00000001) ACPI: WD__ 00000000cfb83200 00134 (v01 DELL PE_SC3 00000001 DELL 00000001) ACPI: SLIC 00000000cfb83338 00176 (v01 DELL PE_SC3 00000001 DELL 00000001) ACPI: ERST 00000000cfb6ab18 00210 (v01 DELL PE_SC3 00000001 DELL 00000001) ACPI: HEST 00000000cfb6ad28 0027C (v01 DELL PE_SC3 00000001 DELL 00000001) ACPI: BERT 00000000cfb6a998 00030 (v01 DELL PE_SC3 00000001 DELL 00000001) ACPI: EINJ 00000000cfb6a9c8 00150 (v01 DELL PE_SC3 00000001 DELL 00000001) ACPI: TCPA 00000000cfb834bc 00064 (v01 DELL PE_SC3 00000001 DELL 00000001) ACPI: Local APIC address 0xfee00000 Setting APIC routing to flat. No NUMA configuration found Faking a node at 0000000000000000-0000000230000000 Bootmem setup node 0 0000000000000000-0000000230000000 NODE_DATA [0000000000011000 - 0000000000044fff] bootmap [0000000000045000 - 000000000008afff] pages 46 (8 early reservations) ==> bootmem [0000000000 - 0230000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 0002029be4] TEXT DATA BSS ==> [0001000000 - 0002029be4] #3 [0036e8e000 - 0037fef716] RAMDISK ==> [0036e8e000 - 0037fef716] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] #5 [000202a000 - 000202a4c9] BRK ==> [000202a000 - 000202a4c9] #6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] #7 [000000c000 - 0000011000] PGTABLE ==> [000000c000 - 0000011000] found SMP MP-table at [ffff8800000fe710] fe710 Reserving 129MB of memory at 48MB for crashkernel (System RAM: 8960MB) [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880028600000-ffff88002f7fffff] on node 0 Zone PFN ranges: DMA 0x00000001 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00230000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000001 -> 0x000000a0 0: 0x00000100 -> 0x000cfb50 0: 0x00100000 -> 0x00230000 On node 0 totalpages: 2095855 DMA zone: 56 pages used for memmap DMA zone: 109 pages reserved DMA zone: 3834 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 832392 pages, LIFO batch:31 Normal zone: 17024 pages used for memmap Normal zone: 1228160 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 Setting APIC routing to flat. ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfec81000] gsi_base[64]) IOAPIC[1]: apic_id 9, version 32, address 0xfec81000, GSI 64-87 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 8 CPUs, 0 hotplug CPUs nr_irqs_gsi: 88 PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 PM: Registered nosave memory: 00000000cfb50000 - 00000000cfb66000 PM: Registered nosave memory: 00000000cfb66000 - 00000000cfb85000 PM: Registered nosave memory: 00000000cfb85000 - 00000000cfb86000 PM: Registered nosave memory: 00000000cfb86000 - 00000000d0000000 PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000 PM: Registered nosave memory: 00000000fe000000 - 0000000100000000 Allocating PCI resources starting at d0000000 (gap: d0000000:10000000) Booting paravirtualized kernel on bare hardware NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 PERCPU: Embedded 30 pages/cpu @ffff880028200000 s90968 r8192 d23720 u262144 pcpu-alloc: s90968 r8192 d23720 u262144 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 4 5 6 7 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2064386 Policy zone: Normal Kernel command line: ro root=/dev/mapper/vg_chmwatchdog-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=129M@0M rd_LVM_LV=vg_chmwatchdog/lv_root KEYBOARDTYPE=pc KEYTABLE=us rd_LVM_LV=vg_chmwatchdog/lv_swap rd_NO_DM rhgb quiet PID hash table entries: 4096 (order: 3, 32768 bytes) Checking aperture... No AGP bridge found PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 software IO TLB at phys 0x20000000 - 0x24000000 Memory: 8032688k/9175040k available (5336k kernel code, 791620k absent, 350732k reserved, 7016k data, 1288k init) Hierarchical RCU implementation. NR_IRQS:33024 nr_irqs:1560 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled allocated 33554432 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups hpet clockevent registered Fast TSC calibration using PIT Detected 2659.948 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5319.89 BogoMIPS (lpj=2659948) pid_max: default: 32768 minimum: 301 Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio Initializing cgroup subsys perf_event Initializing cgroup subsys net_prio CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM1) using mwait in idle threads. ACPI: Core revision 20090903 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 21918 entries in 86 pages APIC routing finalized to flat. ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Xeon(R) CPU X5355 @ 2.66GHz stepping 07 Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver. PEBS disabled due to CPU errata. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 NMI watchdog enabled, takes one hw-pmu counter. Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok. Brought up 8 CPUs Total of 8 processors activated (42559.79 BogoMIPS). sizeof(vma)=200 bytes sizeof(page)=56 bytes sizeof(inode)=592 bytes sizeof(dentry)=192 bytes sizeof(ext3inode)=800 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=2656 bytes devtmpfs: initialized regulator: core version 0.5 NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - efffffff PCI: Using configuration type 1 for base access PCI: Dell PowerEdge 2950 detected, enabling pci=bfsort. bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_SB_._OSC] (Node ffff88022cce4b50), AE_NOT_FOUND ACPI: BIOS _OSI(Linux) query ignored ACPI: Interpreter enabled ACPI: (supports S0 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. HEST: Table parsing has been initialized. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xfdffffff] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfdffffff] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold pci 0000:00:00.0: PME# disabled pci 0000:00:02.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: PME# disabled pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: PME# disabled pci 0000:00:07.0: PME# supported from D0 D3hot D3cold pci 0000:00:07.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1d.0: reg 20: [io 0xcce0-0xccff] pci 0000:00:1d.1: reg 20: [io 0xccc0-0xccdf] pci 0000:00:1d.2: reg 20: [io 0xcca0-0xccbf] pci 0000:00:1d.7: reg 10: [mem 0xfc800400-0xfc8007ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:1f.1: reg 20: [io 0xfc00-0xfc0f] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold pci 0000:06:00.0: PME# disabled pci 0000:06:00.3: PME# supported from D0 D3hot D3cold pci 0000:06:00.3: PME# disabled pci 0000:00:02.0: PCI bridge to [bus 06-0b] pci 0000:00:02.0: bridge window [mem 0xf2000000-0xf7ffffff] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold pci 0000:07:00.0: PME# disabled pci 0000:07:01.0: PME# supported from D0 D3hot D3cold pci 0000:07:01.0: PME# disabled pci 0000:06:00.0: PCI bridge to [bus 07-0a] pci 0000:06:00.0: bridge window [mem 0xf4000000-0xf7ffffff] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold pci 0000:08:00.0: PME# disabled pci 0000:07:00.0: PCI bridge to [bus 08-09] pci 0000:07:00.0: bridge window [mem 0xf4000000-0xf7ffffff] pci 0000:09:00.0: reg 10: [mem 0xf4000000-0xf5ffffff 64bit] pci 0000:09:00.0: PME# supported from D3hot D3cold pci 0000:09:00.0: PME# disabled pci 0000:08:00.0: PCI bridge to [bus 09-09] pci 0000:08:00.0: bridge window [mem 0xf4000000-0xf7ffffff] pci 0000:07:01.0: PCI bridge to [bus 0a-0a] pci 0000:06:00.3: PCI bridge to [bus 0b-0b] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold pci 0000:01:00.0: PME# disabled pci 0000:01:00.2: PME# supported from D0 D3hot D3cold pci 0000:01:00.2: PME# disabled pci 0000:00:03.0: PCI bridge to [bus 01-03] pci 0000:00:03.0: bridge window [mem 0xfc500000-0xfc7fffff] pci 0000:00:03.0: bridge window [mem 0xd8000000-0xd80fffff 64bit pref] pci 0000:02:0e.0: reg 10: [mem 0xd80f0000-0xd80fffff pref] pci 0000:02:0e.0: reg 18: [mem 0xfc7c0000-0xfc7dffff] pci 0000:02:0e.0: reg 30: [mem 0xfc600000-0xfc607fff pref] pci 0000:02:0e.0: supports D1 pci 0000:01:00.0: PCI bridge to [bus 02-02] pci 0000:01:00.0: bridge window [mem 0xfc600000-0xfc7fffff] pci 0000:01:00.0: bridge window [mem 0xd8000000-0xd80fffff 64bit pref] pci 0000:01:00.2: PCI bridge to [bus 03-03] pci 0000:0c:00.0: reg 10: [mem 0xfc3e0000-0xfc3fffff] pci 0000:0c:00.0: reg 14: [mem 0xfc3c0000-0xfc3dffff] pci 0000:0c:00.0: reg 18: [io 0xece0-0xecff] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold pci 0000:0c:00.0: PME# disabled pci 0000:0c:00.1: reg 10: [mem 0xfc3a0000-0xfc3bffff] pci 0000:0c:00.1: reg 14: [mem 0xfc380000-0xfc39ffff] pci 0000:0c:00.1: reg 18: [io 0xecc0-0xecdf] pci 0000:0c:00.1: PME# supported from D0 D3hot D3cold pci 0000:0c:00.1: PME# disabled pci 0000:00:04.0: PCI bridge to [bus 0c-0c] pci 0000:00:04.0: bridge window [io 0xe000-0xefff] pci 0000:00:04.0: bridge window [mem 0xfc300000-0xfc4fffff] pci 0000:00:05.0: PCI bridge to [bus 0d-0d] pci 0000:00:06.0: PCI bridge to [bus 0e-0e] pci 0000:00:07.0: PCI bridge to [bus 0f-0f] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:00:1c.0: PCI bridge to [bus 04-05] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xfbffffff] pci 0000:05:00.0: reg 10: [mem 0xf8000000-0xf9ffffff 64bit] pci 0000:05:00.0: PME# supported from D3hot D3cold pci 0000:05:00.0: PME# disabled pci 0000:04:00.0: PCI bridge to [bus 05-05] pci 0000:04:00.0: bridge window [mem 0xf8000000-0xfbffffff] pci 0000:10:0d.0: reg 10: [mem 0xd0000000-0xd7ffffff pref] pci 0000:10:0d.0: reg 14: [io 0xdc00-0xdcff] pci 0000:10:0d.0: reg 18: [mem 0xfc2d0000-0xfc2dffff] pci 0000:10:0d.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:10:0d.0: supports D1 D2 pci 0000:00:1e.0: PCI bridge to [bus 10-10] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] pci 0000:00:1e.0: bridge window [mem 0xfc100000-0xfc2fffff] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xfdffffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.PE2P._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBEX._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT] pci0000:00: Requesting ACPI _OSC control (0x15) pci0000:00: ACPI _OSC control (0x15) granted ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 *11 12) ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 *10 11 12) ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 *5 6 7 10 11 12) ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 *6 7 10 11 12) ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 *10 11 12) ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 *11 12) ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. vgaarb: device added: PCI:0000:10:0d.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:10:0d.0 SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64 PCI: pci_cache_line_size set to 64 bytes NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) pnp 00:01: [io 0x0080-0x009f] pnp 00:01: [io 0x0000-0x001f] pnp 00:01: [io 0x00c0-0x00df] pnp 00:01: [dma 4] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:02: [io 0x00f0-0x00ff] pnp 00:02: [irq 13] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:03: [io 0x0061] pnp 00:03: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:04: [io 0x0070-0x007f] pnp 00:04: [irq 8] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (disabled) pnp 00:06: [io 0x03f8-0x03ff] pnp 00:06: [irq 4] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:07: [io 0x02f8-0x02ff] pnp 00:07: [irq 3] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:08: [io 0x0800-0x087f] pnp 00:08: [io 0x0880-0x08bf] pnp 00:08: [io 0x08c0-0x08df] pnp 00:08: [io 0x08e0-0x08e3] pnp 00:08: [io 0x0900] pnp 00:08: [io 0x0c00-0x0c7f] pnp 00:08: [io 0x0ca0-0x0ca7] pnp 00:08: [io 0x0ca9-0x0cab] pnp 00:08: [io 0x0cad-0x0caf] pnp 00:08: [io 0x0060] pnp 00:08: [io 0x0064] pnp 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:09: [io 0x0ca8] pnp 00:09: [io 0x0cac] pnp 00:09: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active) pnp 00:0a: [mem 0xe0000000-0xefffffff] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0b: [mem 0xfed00000-0xfed003ff] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active) pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered system 00:08: [io 0x0800-0x087f] has been reserved system 00:08: [io 0x0880-0x08bf] has been reserved system 00:08: [io 0x08c0-0x08df] has been reserved system 00:08: [io 0x08e0-0x08e3] has been reserved system 00:08: [io 0x0900] has been reserved system 00:08: [io 0x0c00-0x0c7f] has been reserved system 00:08: [io 0x0ca0-0x0ca7] has been reserved system 00:08: [io 0x0ca9-0x0cab] has been reserved system 00:08: [io 0x0cad-0x0caf] has been reserved system 00:09: [io 0x0ca8] has been reserved system 00:09: [io 0x0cac] has been reserved system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved pci 0000:08:00.0: PCI bridge to [bus 09-09] pci 0000:08:00.0: bridge window [mem 0xf4000000-0xf7ffffff] pci 0000:07:00.0: PCI bridge to [bus 08-09] pci 0000:07:00.0: bridge window [mem 0xf4000000-0xf7ffffff] pci 0000:07:01.0: PCI bridge to [bus 0a-0a] pci 0000:06:00.0: PCI bridge to [bus 07-0a] pci 0000:06:00.0: bridge window [mem 0xf4000000-0xf7ffffff] pci 0000:06:00.3: PCI bridge to [bus 0b-0b] pci 0000:00:02.0: PCI bridge to [bus 06-0b] pci 0000:00:02.0: bridge window [mem 0xf2000000-0xf7ffffff] pci 0000:01:00.0: PCI bridge to [bus 02-02] pci 0000:01:00.0: bridge window [mem 0xfc600000-0xfc7fffff] pci 0000:01:00.0: bridge window [mem 0xd8000000-0xd80fffff 64bit pref] pci 0000:01:00.2: PCI bridge to [bus 03-03] pci 0000:00:03.0: PCI bridge to [bus 01-03] pci 0000:00:03.0: bridge window [mem 0xfc500000-0xfc7fffff] pci 0000:00:03.0: bridge window [mem 0xd8000000-0xd80fffff 64bit pref] pci 0000:00:04.0: PCI bridge to [bus 0c-0c] pci 0000:00:04.0: bridge window [io 0xe000-0xefff] pci 0000:00:04.0: bridge window [mem 0xfc300000-0xfc4fffff] pci 0000:00:05.0: PCI bridge to [bus 0d-0d] pci 0000:00:06.0: PCI bridge to [bus 0e-0e] pci 0000:00:07.0: PCI bridge to [bus 0f-0f] pci 0000:04:00.0: PCI bridge to [bus 05-05] pci 0000:04:00.0: bridge window [mem 0xf8000000-0xfbffffff] pci 0000:00:1c.0: PCI bridge to [bus 04-05] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xfbffffff] pci 0000:10:0d.0: BAR 6: assigned [mem 0xfc100000-0xfc11ffff pref] pci 0000:00:1e.0: PCI bridge to [bus 10-10] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] pci 0000:00:1e.0: bridge window [mem 0xfc100000-0xfc2fffff] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref] alloc irq_desc for 16 on node -1 alloc kstat_irqs on node -1 pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 pci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:06:00.0: setting latency timer to 64 pci 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:07:00.0: setting latency timer to 64 pci 0000:08:00.0: setting latency timer to 64 pci 0000:07:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:07:01.0: setting latency timer to 64 pci 0000:06:00.3: setting latency timer to 64 pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:03.0: setting latency timer to 64 pci 0000:01:00.0: setting latency timer to 64 pci 0000:01:00.2: setting latency timer to 64 pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:04.0: setting latency timer to 64 pci 0000:00:05.0: setting latency timer to 64 pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:06.0: setting latency timer to 64 pci 0000:00:07.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:04:00.0: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xfdffffff] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff] pci_bus 0000:06: resource 1 [mem 0xf2000000-0xf7ffffff] pci_bus 0000:07: resource 1 [mem 0xf4000000-0xf7ffffff] pci_bus 0000:08: resource 1 [mem 0xf4000000-0xf7ffffff] pci_bus 0000:09: resource 1 [mem 0xf4000000-0xf7ffffff] pci_bus 0000:01: resource 1 [mem 0xfc500000-0xfc7fffff] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xd80fffff 64bit pref] pci_bus 0000:02: resource 1 [mem 0xfc600000-0xfc7fffff] pci_bus 0000:02: resource 2 [mem 0xd8000000-0xd80fffff 64bit pref] pci_bus 0000:0c: resource 0 [io 0xe000-0xefff] pci_bus 0000:0c: resource 1 [mem 0xfc300000-0xfc4fffff] pci_bus 0000:04: resource 1 [mem 0xf8000000-0xfbffffff] pci_bus 0000:05: resource 1 [mem 0xf8000000-0xfbffffff] pci_bus 0000:10: resource 0 [io 0xd000-0xdfff] pci_bus 0000:10: resource 1 [mem 0xfc100000-0xfc2fffff] pci_bus 0000:10: resource 2 [mem 0xd0000000-0xd7ffffff 64bit pref] pci_bus 0000:10: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:10: resource 5 [io 0x0d00-0xffff] pci_bus 0000:10: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:10: resource 7 [mem 0xd0000000-0xfdffffff] pci_bus 0000:10: resource 8 [mem 0xfed40000-0xfed44fff] NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 alloc irq_desc for 21 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 pci 0000:00:1d.0: PCI INT A disabled alloc irq_desc for 20 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20 pci 0000:00:1d.1: PCI INT B disabled pci 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21 pci 0000:00:1d.2: PCI INT C disabled pci 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21 pci 0000:00:1d.7: PCI INT A disabled pci 0000:00:1f.0: rerouting interrupts for [8086:2670] pci 0000:01:00.0: rerouting interrupts for [8086:0370] pci 0000:01:00.2: rerouting interrupts for [8086:0372] pci 0000:10:0d.0: Boot video device Trying to unpack rootfs image as initramfs... Freeing initrd memory: 17797k freed futex hash table entries: 2048 (order: 5, 131072 bytes) audit: initializing netlink socket (disabled) type=2000 audit(1426778595.562:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 15723 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) ksign: Installing public key data Loading keyring - Added public key 99BA280A469ED0C1 - User ID: CentOS (Kernel Module GPG key) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:02.0: setting latency timer to 64 alloc irq_desc for 88 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:02.0: irq 88 for MSI/MSI-X pcieport 0000:00:03.0: setting latency timer to 64 alloc irq_desc for 89 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:03.0: irq 89 for MSI/MSI-X pcieport 0000:00:04.0: setting latency timer to 64 alloc irq_desc for 90 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:04.0: irq 90 for MSI/MSI-X pcieport 0000:00:05.0: setting latency timer to 64 alloc irq_desc for 91 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:05.0: irq 91 for MSI/MSI-X pcieport 0000:00:06.0: setting latency timer to 64 alloc irq_desc for 92 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:06.0: irq 92 for MSI/MSI-X pcieport 0000:00:07.0: setting latency timer to 64 alloc irq_desc for 93 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:07.0: irq 93 for MSI/MSI-X pcieport 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 94 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.0: irq 94 for MSI/MSI-X pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 intel_idle: MWAIT substates: 0x20 intel_idle: does not run on family 6 model 15 input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] ACPI: acpi_idle registered with cpuidle [Firmware Bug]: No valid trip found ERST: Failed to get Error Log Address Range. GHES: APEI firmware first mode is enabled by WHEA _OSC. Non-volatile memory driver v1.3 Linux agpgart interface v0.103 crash memory driver: version 1.1 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input1 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported ehci_hcd 0000:00:1d.7: irq 21, io mem 0xfc800400 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32-504.8.1.el6.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000cce0 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32-504.8.1.el6.x86_64 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000ccc0 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.32-504.8.1.el6.x86_64 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000cca0 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.32-504.8.1.el6.x86_64 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:04: RTC can wake from S4 rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu EFI Variables Facility v0.08 2004-May-17 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver GRE over IPv4 demultiplexor driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 registered taskstats version 1 rtc_cmos 00:04: setting system clock to 2015-03-19 15:23:16 UTC (1426778596) Initalizing network drop monitor service Freeing unused kernel memory: 1288k freed Write protecting the kernel read-only data: 10240k Freeing unused kernel memory: 788k freed Freeing unused kernel memory: 1568k freed dracut: dracut-004-356.el6 dracut: rd_NO_LUKS: removing cryptoluks activation device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com udev: starting version 147 [drm] Initialized drm 1.1.0 20060810 [drm] radeon kernel modesetting enabled. alloc irq_desc for 19 on node -1 alloc kstat_irqs on node -1 radeon 0000:10:0d.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x1028:0x01B2). [drm] register mmio base: 0xFC2D0000 [drm] register mmio size: 65536 radeon 0000:10:0d.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (16M used) radeon 0000:10:0d.0: GTT: 512M 0x00000000B0000000 - 0x00000000CFFFFFFF [drm] Detected VRAM RAM=128M, BAR=128M [drm] RAM width 16bits DDR [TTM] Zone kernel: Available graphics memory: 4027066 kiB [TTM] Zone dma32: Available graphics memory: 2097152 kiB [TTM] Initializing pool allocator [TTM] Initializing DMA pool allocator [drm] radeon: 16M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] PCI GART of 512M enabled (table at 0x0000000037880000). radeon 0000:10:0d.0: WB disabled radeon 0000:10:0d.0: fence driver on ring 0 use gpu addr 0x00000000b0000000 and cpu addr 0xffff880037824000 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. [drm] radeon: irq initialized. [drm] Loading R100 Microcode radeon 0000:10:0d.0: firmware: requesting radeon/R100_cp.bin [drm] radeon: ring at 0x00000000B0001000 [drm] ring test succeeded in 1 usecs [drm] ib test succeeded in 0 usecs [drm] Radeon Display Connectors [drm] Connector 0: [drm] VGA-1 [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [drm] Encoders: [drm] CRT1: INTERNAL_DAC1 usb 1-1: new high speed USB device number 2 using ehci_hcd [drm] fb mappable at 0xD0040000 [drm] vram apper at 0xD0000000 [drm] size 1310720 [drm] fb depth is 8 [drm] pitch is 1280 fbcon: radeondrmfb (fb0) is primary device usb 1-1: New USB device found, idVendor=413c, idProduct=a001 usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-1: configuration #1 chosen from 1 choice hub 1-1:1.0: USB hub found hub 1-1:1.0: 2 ports detected Refined TSC clocksource calibration: 2659.999 MHz. Switching to clocksource tsc Console: switching to colour frame buffer device 160x64 radeon 0000:10:0d.0: fb0: radeondrmfb frame buffer device radeon 0000:10:0d.0: registered panic notifier [drm] Initialized radeon 2.37.0 20080528 for 0000:10:0d.0 on minor 0 dracut: Starting plymouth daemon usb 1-5: new high speed USB device number 4 using ehci_hcd dracut: rd_NO_DM: removing DM RAID activation dracut: rd_NO_MD: removing MD RAID activation megasas: 06.803.01.00-rh1 Mon. Mar. 10 17:00:00 PDT 2014 megasas: 0x1028:0x0015:0x1028:0x1f03: bus 2:slot 14:func 0 alloc irq_desc for 78 on node -1 alloc kstat_irqs on node -1 megaraid_sas 0000:02:0e.0: PCI INT A -> GSI 78 (level, low) -> IRQ 78 megasas: FW now in Ready state megasas_init_mfi: fw_support_ieee=0 megasas: INIT adapter done usb 1-5: New USB device found, idVendor=04b4, idProduct=6560 usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-5: configuration #1 chosen from 1 choice hub 1-5:1.0: USB hub found hub 1-5:1.0: 4 ports detected megaraid_sas 0000:02:0e.0: Controller type: MR,Memory size is: 256MB megaraid_sas: fw state:c0000000 megasas: fwstate:c0000000, dis_OCR=0 scsi0 : LSI SAS based MegaRAID driver scsi 0:0:0:0: Direct-Access FUJITSU MAX3073RC D206 PQ: 0 ANSI: 3 scsi 0:0:1:0: Direct-Access SEAGATE ST3146356SS HS0F PQ: 0 ANSI: 5 scsi 0:0:2:0: Direct-Access FUJITSU MAX3073RC D206 PQ: 0 ANSI: 3 scsi 0:0:3:0: Direct-Access SEAGATE ST3300657SS ES66 PQ: 0 ANSI: 5 scsi 0:0:4:0: Direct-Access FUJITSU MAX3073RC D206 PQ: 0 ANSI: 3 scsi 0:0:5:0: Direct-Access FUJITSU MBA3073RC D306 PQ: 0 ANSI: 5 scsi 0:0:8:0: Enclosure DP BACKPLANE 1.05 PQ: 0 ANSI: 5 usb 3-1: new full speed USB device number 2 using uhci_hcd scsi 0:2:0:0: Direct-Access DELL PERC 5/i 1.03 PQ: 0 ANSI: 5 ata_piix 0000:00:1f.1: version 2.13 ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi1 : ata_piix scsi2 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 ata2: port disabled. ignoring. usb 3-1: New USB device found, idVendor=0557, idProduct=8021 usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 3-1: configuration #1 chosen from 1 choice hub 3-1:1.0: USB hub found hub 3-1:1.0: 4 ports detected ata1.00: ATAPI: HL-DT-STCD-RW/DVD-ROM GCC-4244N, B101, max UDMA/33 ata1.00: configured for UDMA/33 scsi 1:0:0:0: CD-ROM HL-DT-ST CDRW/DVD GCC4244 B101 PQ: 0 ANSI: 5 usb 1-1.1: new full speed USB device number 5 using ehci_hcd STARTING CRC_T10DIF sd 0:2:0:0: [sda] 710410240 512-byte logical blocks: (363 GB/338 GiB) sd 0:2:0:0: [sda] Write Protect is off sd 0:2:0:0: [sda] Mode Sense: 1f 00 00 08 sd 0:2:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:2:0:0: [sda] Attached SCSI disk usb 1-1.1: New USB device found, idVendor=413c, idProduct=0000 usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1.1: Product: DRAC5 usb 1-1.1: Manufacturer: Dell usb 1-1.1: SerialNumber: 0000000 usb 1-1.1: configuration #1 chosen from 1 choice input: Dell DRAC5 as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.1/1-1.1:1.0/input/input2 generic-usb 0003:413C:0000.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell DRAC5] on usb-0000:00:1d.7-1.1/input0 input: Dell DRAC5 as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.1/1-1.1:1.1/input/input3 generic-usb 0003:413C:0000.0002: input,hidraw1: USB HID v1.10 Mouse [Dell DRAC5] on usb-0000:00:1d.7-1.1/input1 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 usb 1-1.2: new high speed USB device number 6 using ehci_hcd usb 1-1.2: New USB device found, idVendor=413c, idProduct=0001 usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1.2: Product: DRAC5 VIRTUAL MEDIA usb 1-1.2: Manufacturer: DELL INC. usb 1-1.2: SerialNumber: 1028 123456 usb 1-1.2: configuration #1 chosen from 1 choice Initializing USB Mass Storage driver... scsi3 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 6 usb-storage: waiting for device to settle before scanning scsi4 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 6 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage USB Mass Storage support registered. dracut: Scanning devices sda2 for LVM logical volumes vg_chmwatchdog/lv_root vg_chmwatchdog/lv_swap dracut: inactive '/dev/vg_chmwatchdog/lv_root' [50.00 GiB] inherit dracut: inactive '/dev/vg_chmwatchdog/lv_home' [280.45 GiB] inherit dracut: inactive '/dev/vg_chmwatchdog/lv_swap' [7.81 GiB] inherit usb 3-1.1: new low speed USB device number 3 using uhci_hcd usb 3-1.1: New USB device found, idVendor=0557, idProduct=2261 usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1.1: Product: GCS1716 V3.0.292 usb 3-1.1: Manufacturer: ATEN International Co. Ltd usb 3-1.1: configuration #1 chosen from 1 choice input: ATEN International Co. Ltd GCS1716 V3.0.292 as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.1/3-1.1:1.0/input/input4 generic-usb 0003:0557:2261.0003: input,hidraw2: USB HID v1.00 Keyboard [ATEN International Co. Ltd GCS1716 V3.0.292] on usb-0000:00:1d.1-1.1/input0 input: ATEN International Co. Ltd GCS1716 V3.0.292 as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.1/3-1.1:1.1/input/input5 generic-usb 0003:0557:2261.0004: input,hidraw3: USB HID v1.00 Device [ATEN International Co. Ltd GCS1716 V3.0.292] on usb-0000:00:1d.1-1.1/input1 input: ATEN International Co. Ltd GCS1716 V3.0.292 as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.1/3-1.1:1.2/input/input6 generic-usb 0003:0557:2261.0005: input,hidraw4: USB HID v1.00 Mouse [ATEN International Co. Ltd GCS1716 V3.0.292] on usb-0000:00:1d.1-1.1/input2 input: ATEN International Co. Ltd GCS1716 V3.0.292 as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.1/3-1.1:1.3/input/input7 generic-usb 0003:0557:2261.0006: input,hidraw5: USB HID v1.10 Mouse [ATEN International Co. Ltd GCS1716 V3.0.292] on usb-0000:00:1d.1-1.1/input3 EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: dracut: Mounted root filesystem /dev/mapper/vg_chmwatchdog-lv_root SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks type=1404 audit(1426778598.546:2): selinux=0 auid=4294967295 ses=4294967295 dracut: dracut: Switching root usb-storage: device scan complete usb-storage: device scan complete scsi 4:0:0:0: Direct-Access Dell Virtual Floppy 123 PQ: 0 ANSI: 0 CCS scsi 3:0:0:0: CD-ROM Dell Virtual CDROM 123 PQ: 0 ANSI: 0 CCS sd 4:0:0:0: [sdb] Attached SCSI removable disk sr1: scsi-1 drive sr 3:0:0:0: Attached scsi CD-ROM sr1 udev: starting version 147 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k e1000e: Copyright(c) 1999 - 2014 Intel Corporation. e1000e 0000:0c:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 e1000e 0000:0c:00.0: setting latency timer to 64 e1000e 0000:0c:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode alloc irq_desc for 95 on node -1 alloc kstat_irqs on node -1 e1000e 0000:0c:00.0: irq 95 for MSI/MSI-X e1000e 0000:0c:00.0: eth0: (PCI Express:2.5GT/s:Width x4) 00:15:17:1c:7b:40 e1000e 0000:0c:00.0: eth0: Intel(R) PRO/1000 Network Connection e1000e 0000:0c:00.0: eth0: MAC: 0, PHY: 4, PBA No: C57721-004 alloc irq_desc for 17 on node -1 alloc kstat_irqs on node -1 e1000e 0000:0c:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 e1000e 0000:0c:00.1: setting latency timer to 64 e1000e 0000:0c:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode alloc irq_desc for 96 on node -1 alloc kstat_irqs on node -1 e1000e 0000:0c:00.1: irq 96 for MSI/MSI-X e1000e 0000:0c:00.1: eth1: (PCI Express:2.5GT/s:Width x4) 00:15:17:1c:7b:41 e1000e 0000:0c:00.1: eth1: Intel(R) PRO/1000 Network Connection e1000e 0000:0c:00.1: eth1: MAC: 0, PHY: 4, PBA No: C57721-004 EDAC MC: Ver: 2.1.0 Jan 28 2015 EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV 0000:00:10.0 EDAC PCI0: Giving out device to module 'i5000_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED) intel_rng: FWH not detected ses 0:0:8:0: Attached Enclosure device ses 0:0:8:0: Attached scsi generic sg0 type 13 sd 0:2:0:0: Attached scsi generic sg1 type 0 sr 1:0:0:0: Attached scsi generic sg2 type 5 sd 4:0:0:0: Attached scsi generic sg3 type 0 sr 3:0:0:0: Attached scsi generic sg4 type 5 bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.2.4 (Aug 05, 2013) bnx2 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 bnx2 0000:05:00.0: firmware: requesting bnx2/bnx2-mips-06-6.2.3.fw bnx2 0000:05:00.0: firmware: requesting bnx2/bnx2-rv2p-06-6.0.15.fw bnx2 0000:05:00.0: eth2: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 16, node addr 00:18:8b:52:50:c3 bnx2 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 bnx2 0000:09:00.0: firmware: requesting bnx2/bnx2-mips-06-6.2.3.fw bnx2 0000:09:00.0: firmware: requesting bnx2/bnx2-rv2p-06-6.0.15.fw bnx2 0000:09:00.0: eth3: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f4000000, IRQ 16, node addr 00:18:8b:52:50:c5 udev: renamed network interface eth2 to Auto_eth2 dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si: probing via SMBIOS ipmi_si: SMBIOS: io 0xca8 regsize 1 spacing 4 irq 0 ipmi_si: Adding SMBIOS-specified kcs state machine ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 0 udev: renamed network interface eth3 to Auto_eth3 ipmi_si ipmi_si.0: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20) ipmi_si ipmi_si.0: IPMI kcs interface initialized microcode: CPU0 sig=0x6f7, pf=0x40, revision=0x67 platform microcode: firmware: requesting intel-ucode/06-0f-07 microcode: CPU1 sig=0x6f7, pf=0x40, revision=0x67 platform microcode: firmware: requesting intel-ucode/06-0f-07 microcode: CPU2 sig=0x6f7, pf=0x40, revision=0x67 platform microcode: firmware: requesting intel-ucode/06-0f-07 microcode: CPU3 sig=0x6f7, pf=0x40, revision=0x67 platform microcode: firmware: requesting intel-ucode/06-0f-07 microcode: CPU4 sig=0x6f7, pf=0x40, revision=0x67 platform microcode: firmware: requesting intel-ucode/06-0f-07 microcode: CPU5 sig=0x6f7, pf=0x40, revision=0x67 platform microcode: firmware: requesting intel-ucode/06-0f-07 microcode: CPU6 sig=0x6f7, pf=0x40, revision=0x67 platform microcode: firmware: requesting intel-ucode/06-0f-07 microcode: CPU7 sig=0x6f7, pf=0x40, revision=0x67 platform microcode: firmware: requesting intel-ucode/06-0f-07 Microcode Update Driver: v2.00 , Peter Oruba microcode: CPU0 updated to revision 0x6b, date = 2010-10-02 microcode: CPU1 updated to revision 0x6b, date = 2010-10-02 microcode: CPU2 updated to revision 0x6b, date = 2010-10-02 microcode: CPU3 updated to revision 0x6b, date = 2010-10-02 microcode: CPU4 updated to revision 0x6b, date = 2010-10-02 microcode: CPU5 updated to revision 0x6b, date = 2010-10-02 microcode: CPU6 updated to revision 0x6b, date = 2010-10-02 microcode: CPU7 updated to revision 0x6b, date = 2010-10-02 iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh iTCO_wdt: Found a 631xESB/632xESB TCO device (Version=2, TCOBASE=0x0860) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: Adding 8191996k swap on /dev/mapper/vg_chmwatchdog-lv_swap. Priority:-1 extents:1 across:8191996k type=1305 audit(1426778602.488:3): audit_pid=1481 old=0 auid=4294967295 ses=4294967295 res=1 p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition to frequency scaling. You should use that instead of p4-clockmod, if possible. p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller NET: Registered protocol family 10 lo: Disabled Privacy Extensions cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.20 (March 14, 2014) bnx2fc: Broadcom NetXtreme II FCoE Driver bnx2fc v2.4.2 (Dec 11, 2013) netlink: 12 bytes leftover after parsing attributes. netlink: 12 bytes leftover after parsing attributes. netlink: 12 bytes leftover after parsing attributes. netlink: 12 bytes leftover after parsing attributes. alloc irq_desc for 97 on node -1 alloc kstat_irqs on node -1 bnx2 0000:09:00.0: irq 97 for MSI/MSI-X bnx2 0000:09:00.0: Auto_eth3: using MSI ADDRCONF(NETDEV_UP): Auto_eth3: link is not ready e1000e 0000:0c:00.0: irq 95 for MSI/MSI-X e1000e 0000:0c:00.0: irq 95 for MSI/MSI-X 8021q: adding VLAN 0 to HW filter on device eth0 ADDRCONF(NETDEV_UP): eth0: link is not ready e1000e 0000:0c:00.1: irq 96 for MSI/MSI-X e1000e 0000:0c:00.1: irq 96 for MSI/MSI-X 8021q: adding VLAN 0 to HW filter on device eth1 ADDRCONF(NETDEV_UP): eth1: link is not ready alloc irq_desc for 98 on node -1 alloc kstat_irqs on node -1 bnx2 0000:05:00.0: irq 98 for MSI/MSI-X bnx2 0000:05:00.0: Auto_eth2: using MSI ADDRCONF(NETDEV_UP): Auto_eth2: link is not ready bnx2 0000:09:00.0: Auto_eth3: NIC Copper Link is Up, 1000 Mbps full duplex ADDRCONF(NETDEV_CHANGE): Auto_eth3: link becomes ready bnx2 0000:05:00.0: Auto_eth2: NIC Copper Link is Up, 1000 Mbps full duplex ADDRCONF(NETDEV_CHANGE): Auto_eth2: link becomes ready Auto_eth3: no IPv6 routers present Auto_eth2: no IPv6 routers present fuse init (API version 7.14) ----------------------------------------------------------------- END OF FILE ----------------------------------------------------------------- 84d16660fe87b9409b08c13b89096bc2 /tmp/pandora_diag.20150319_114638.data